Electric Lock Release; Monitor Setup Instructions; Sounds Settings - Intelligent Home Alecto Installation And User Manual

Video door system 2-wire series
Hide thumbs Also See for Alecto:
Table of Contents

Advertisement

4.1 Electric Lock Release

You can open the lock by touching
There are two icons Lock1 and Lock2 which means you can have up to 2 electric locks connected
and opened independently. If system connected to a lock, remember to set unlocking time and
lock mode. Settings are changed on the "Installer Setup" page. To access the page, touch "Intel-
ligent Home" icon on the left hand side, at the bottom. Touch and hold "Unlock" button for 2
seconds to open digital keypad page. Using the keypad, type in the following codes:
8010 # for Power-on-to open lock
8011 # for Power-off-to open lock
To set the unlocking time, use codes 8401-8499 # for 1 to 99 seconds
Example: Type in 8401 # for 1 second unlocking time, 8499 # for 99 secs unlocking time
1.Touch
the main menu page

5. Monitor Setup Instructions

5.1. Sounds Settings

Touch settings
Here you can set ringtones for door stations and Inter-
com between rooms and Day/Night ring volume.
"United" means same ring tone will be set for eve-
rything, "Separate"- different ring tones. Touch
icon to exit and return to home page
Local Address
Video Standard
System Verson
Display Driver
Front
UI
icon on
2.Touch
button and hold for 2s
icon and choose "Sounds".
UNLOCK Button or touching
About
00.00
AUTO
00.01.00
1.0
1.0
1.0
UNLOCK
icon on the screen
INSTALLER SETUP
123
_
3.A digital keypad will
be shown
-6-

Advertisement

Table of Contents
loading

Table of Contents