Table of Contents
Advertisement
5.8. Pictures and Video Playback
Touch
Playback icon to play recorded pictures or videos
Touch
icon to Start/Pause the playback
5.9. Multi Monitor System
There are two ways of connecting multiple monitors:
1. Daisy Chain - each monitor connects to the next monitor
2. Star Connection - all monitors connect to a central point
Up to 16 video monitors can be connected in a house system. Up to 4 monitors in each apart-
ment for Apartment systems. Each monitor in either system must be programmed with a"User
Code"- the address.
How to program the "User Code" (address) for Daisy Chain connection
Go into Installer Setup by touching "Intelligent Home" icon on the left hand side, at the bot-
tom. This will open the "About" page. Touch and hold "Unlock" button for 2 seconds, and the
digital keypad page will open.
Programming of code 8000# for the first monitor in a chain makes it the Master monitor
Code
8001# to program the monitor as Slave 1
Code 8002# to program the monitor as Slave 2
Code 8003# to program the monitor as Slave 3
If there are more than three Slave monitors in the system, program them as Slave 1, 2, 3 as
well.
Code 8001 # to program the monitor as Slave 4
Code 8002 # to program a monitor as Slave 5 and so on
In addition to User Code programming, last monitor in the chain have to have DIP-3 set On
(end of line)
1.Touch
the main menu page
Local Address
Video Standard
System Verson
Display Driver
Front
UI
icon on
2.Touch
button and hold for 2s
Image:008/020
2014/06/23
About
00.00
AUTO
00.01.00
1.0
1.0
1.0
UNLOCK
14:36:55
INSTALLER SETUP
123
_
3.A digital keypad will
be shown
-10-
Advertisement
Table of Contents
