Download  Print this page

Makita RP2300FC Technical Information

Router
Hide thumbs

Advertisement

T
ECHNICAL INFORMATION
Model No.
Description
C
ONCEPT AND MAIN APPLICATIONS
Models RP2300FC and RP2301FC are upgraded sister tools of our current
plunge-type electronic router Model 3612C. Their main benefits are:
Linear ball bearing for super-smooth plunge action
Ergonomically contoured knob style handles
Powerful cutting with the continuous rating input higher than Model 3612C;
RP2300FC: 2,300W, RP2301FC: 2,100W
RP2301FC additionally feature electric brake.
These products are available in the following variations.
Electric
Model No.
brake
RP2300FC
No
RP2301FC
Yes
RP2300FCX
No
RP2301FCX
Yes
S
pecification
RP2300FC
Voltage (V)
110
120
220
230
240
RP2301FC
Voltage (V)
110
120
220
230
240
Model No.
No load speed: min
Collet capacity: mm (")
Plunge capacity: mm (")
Constant speed control
Soft start
Variable speed control by dial
Electric brake
LED job light
Double insulation
Power supply cord: m (ft)
Net weight*
: kg (lbs)
2
*1: Twin LED job lights with afterglow function
*2 Weight according to EPTA-Procedure 01/2003, including Dust nozzle
(See next page for Standard equipment and Optional accessories.)
RP2300FC, RP2301FC
Router
Twin LED
job lights
(Straight guide + Guide holder assembly)
Yes
High-precision type with fine adjustment function
(Fine adjusting straight guide)
Current (A)
Cycle (Hz)
15
50/60
15
50/60
11
50/60
11
50/60
11
50/60
Current (A)
Cycle (Hz)
15
50/60
15
50/60
10
50/60
10
50/60
10
50/60
=rpm
-1
Europe: 4.0 (13.1), Brazil: 2.0 (6.6), Other countries: 2.5 (8.2)
Straight guide
Standard type
Continuous Rating (W)
Input
1,650
---
2,300
2,300
2,300
Continuous Rating (W)
Input
1,650
---
2,100
2,100
2,100
RP2300FC
9,000 - 22,000
12.0 or 12.7 (1/2)
0 - 70 (0 - 2-3/4)
Yes
Yes
Yes
No
Yes*
1
Yes
6.1 (13.4)
W1
H
W2
Dimensions: mm (")
Length (L)
Width (W1)
Height (H)
Width of base (W2)
Max. Output (W)
Output
650
2,600
650
2,600
1,200
3,400
1,200
3,400
1,200
3,400
Max. Output (W)
Output
650
2,600
650
2,600
1,000
3,400
1,000
3,400
1,000
3,400
RP2301FC
Yes
PRODUCT
P 1/ 27
L
155 (6-1/8)
294 (11-5/8)
312 (12-1/4)
170 (6-11/16)

Advertisement

Table of Contents
loading

  Summary of Contents for Makita RP2300FC

  • Page 1 RP2300FC, RP2301FC Description Router ONCEPT AND MAIN APPLICATIONS Models RP2300FC and RP2301FC are upgraded sister tools of our current plunge-type electronic router Model 3612C. Their main benefits are: Linear ball bearing for super-smooth plunge action Ergonomically contoured knob style handles Powerful cutting with the continuous rating input higher than Model 3612C;...
  • Page 2: Standard Equipment

    P 2/ 27 tandard equipment For all countries: Straight guide (Standard type or High-precision type) ....1 pc Collet cone 12mm or 1/2" ..1 pc + Pan head screw M6x135 (for adjusting cutting depth) ....1 pc Wrench 24 ......1 pc The standard equipment for the tool shown below may vary by country: Collet sleeve 6mm .....
  • Page 3: Necessary Repairing Tools

    P 3/ 27 epair CAUTION: Remove the bit from the machine for safety before repair/ maintenance in accordance with the instruction manual! [1] NECESSARY REPAIRING TOOLS Code No. Description Use for 1R030 Bearing setting pipe 25-17.2 Supporting Pin 6 when assembling shaft lock mechanism 1R041 Vise plate Protecting Armature when holding in vise...
  • Page 4 P 4/ 27 epair [3] DISASSEMBLY/ASSEMBLY [3]-1. Base complete (cont.) DISASSEMBLING Fig. 3 Motor section 5. Remove Pole, Silent pole, Compression spring 13 and Compression spring 11. Silent pole Pole 4. Loosen Lock lever. Base can be separated Compression Compression from Motor section.
  • Page 5 P 5/ 27 epair [3] DISASSEMBLY/ASSEMBLY [3]-1. Base complete ASSEMBLING Take the disassembling step in reverse. Note: Set Compression spring 4 (2pcs.) in the groove on Base complete as illustrated in Fig. 6 M6 - Flat head screw is thread-locker type. When removing it, be sure to apply adhesive (ThreeBond 1321/ 1342 or Loctite 242) to the thread before reusing.
  • Page 6 M5x25 Pan Head screw Fig. 10 Fig. 11 Remove Motor bracket together with In case of Models RP1800F, RP1801F, RP2300FC and RP2301FC, disconnect Connector of Controller from LED circuit prior to Armature from Motor housing by the step described in Fig. 11.
  • Page 7 Remove Ball bearing Remove Bearing retainer 60 by unscrewing In case of Models RP1800F, RP1801F, 6205DDW by striking M4x14 Countersunk head screw. RP2300FC and RP2301F, remove LED Motor bracket with Circuit by removing Bind CT4x12 Plastic hammer. Tapping screw (2pcs.)
  • Page 8 (1) Assemble Ball bearing 6205DDW to Motor bracket. Refer to the right illustration in Fig. 14. (2) In case of RP1800F, RP1801F, RP2300FC and RP2301FC, secure LED circuit with 4x12 Tapping screw (2pcs.). Refer to the center illustration in Fig. 14.
  • Page 9: Shaft Lock

    P 9/ 27 epair [3] DISASSEMBLY/ASSEMBLY [3]-2. Armature, Motor bracket complete (cont.) ASSEMBLING (5) Assemble Grip L to Motor bracket on Lock lever side and secure it with M6x25 Pan head screw. Refer to Fig. 15. Assemble Grip cover L to Grip L by screwing two 4x12 Tapping screws. Refer to Fig. 15. (6) Assemble Armature to Motor bracket.
  • Page 10: Circuit Diagram

    Color index of lead wires' sheath Purple Black White Yellow Orange * Support unit without Choke coil is used for some countries. Chokecoil Makita *Support Unit Name logo side plate side Motor housing This Lead wire may be blue for Controller some countries.
  • Page 11: Wiring Diagram

    P 11/ 27 iring diagram Fig. D-2A RP2301FC with electric Brake, LED Job Light, Electronic Control Wiring in Motor housing on Grip R side (Switch side) When putting Lead wires for connecting to Terminal block, into this Lead wire holder, Controller’s thin Lead wire (purple) has to be put under the following Lead wires.
  • Page 12 P 12/ 27 iring diagram Fig. D-3A RP2301FC with electric Brake, LED Job Light, Electronic Control Wiring in Motor housing on top side (Rear cover side) Support unit Lead wire holder When putting Support unit’s Lead wires Controller into Lead wire holders, put them as follows. Put Controller into * Support unit’s Lead wire (black) the above illustrated...
  • Page 13 P 13/ 27 ircuit diagram Fig. D-1B RP2300FC with LED Job Light, Electronic Control Color index of lead wires' sheath Purple Black White Orange Makita Support unit Name logo side Motor housing plate side Blue Lead wire is used for Controller some countries.
  • Page 14 P 14/ 27 iring diagram Fig. D-2B RP2300FC with LED Job Light, Electronic Control Wiring in Motor housing on Grip R side (Switch side) When putting Lead wires for connecting to Terminal block, into this Lead wire holder, Controller’s thin Lead wire (purple) has to be put under the following Lead wires.
  • Page 15 P 15/ 27 iring diagram Fig. D-3B RP2300FC with LED Job Light, Electronic Control Wiring in Motor housing on top side (Rear cover side) Support unit Lead wire holder When putting Support unit’s Lead wires into Lead wire holders, put them as follows.
  • Page 16 Color index of lead wires' sheath Purple Black White Yellow Orange * Support unit without Choke coil is used for some countries. Choke coil *Support unit Makita Name logo side plate side Motor housing Blue Lead wire is used for Power supply circuit some countries.
  • Page 17 P 17/ 27 iring diagram Fig. D-2C R1801F with electric Brake, LED Job Light Wiring in Motor housing on Grip R side (Switch side) When putting Lead wires for connecting to Terminal block, into this Lead wire holder, thin Lead wire (purple) of Power supply circuit has to be put under the following Lead wires.
  • Page 18 P 18/ 27 iring diagram Fig. D-3C RP1801F with electric Brake, LED Job Light Wiring in Motor housing on top side (Rear cover side) Support unit Lead wire holder When putting Support unit’s Lead wires Power supply circuit into Lead wire holders, put them as follows. Put Power supply * Support unit’s Lead wire (black) circuit into the above...
  • Page 19 Fig. D-1D RP1801 with electric Brake Color index of lead wires' sheath Purple Black White Yellow Orange Choke coil *Support unit Makita Name logo side Motor housing plate side Blue Lead wire be used for some countries. Noise Suppressor Power...
  • Page 20 P 20/ 27 iring diagram Fig. D-2D RP1801 with electric Brake Wiring in Motor housing on Grip R side (Switch side) When putting Lead wires for connecting to Terminal block, into this Lead wire holder, Noise suppressor’s thin Lead wire (white) has to be put under the following Lead wires.
  • Page 21 P 21/ 27 iring diagram Fig. D-3D RP1801 with electric Brake Wiring in Motor housing on top side (Rear cover side) Support unit Lead wire holder When putting Support unit’s Lead wires into Lead wire holders, put them as follows. * Support unit’s Lead wire (black) into Lead wire holder of outside * Support unit’s Lead wires (orange, yellow)
  • Page 22 Fig. D-1E RP1800F with LED Job Light Color index of lead wires' sheath Purple Black White Orange Support unit Makita Name Motor housing logo side plate side Blue Lead wire Power supply circuit is used for some countries.
  • Page 23 P 23/ 27 iring diagram Fig. D-2E RP1800F with LED Job Light Wiring in Motor housing on Grip R side (Switch side) When putting Lead wires for connecting to Terminal block, into this Lead wire holder, thin Lead wire (purple) of Power supply circuit has to be put under the following Lead wires.
  • Page 24 P 24/ 27 iring diagram Fig. D-3E RP1800F with LED Job Light Wiring in Motor housing on top side (Rear cover side) Support Unit Lead wire holder When putting Support unit’s Lead wires Power supply into Lead wire holders, put them as follows. circuit * Support unit’s Lead wire (black) Put Power supply...
  • Page 25 P 25/ 27 ircuit diagram Fig. D-1F RP1800 Color index of lead wires' sheath Orange Black White Purple Support unit Makita Name logo side Motor housing plate side Blue Lead wire is used for some countries. Noise suppressor Power supply...
  • Page 26 P 26/ 27 iring diagram Fig. D-2F RP1800 Wiring in Motor housing on Grip R side (Switch side) When putting Lead wires for connecting to Terminal block, into this Lead wire holder, Noise suppressor’s thin Lead wire (white) has to be put under the following Lead wires.
  • Page 27 P 27/ 27 iring diagram Fig. D-3F RP1800 Wiring in Motor housing on top side (Rear cover side) Support unit Lead wire holder When putting Support unit’s Lead wires into Lead wire holders, put them as follows. * Support unit’s Lead wire (black) into Lead wire holder of outside * Support unit’s Lead wire (orange) into Lead wire holder of inside...

This manual is also suitable for:

Rp2301fc