Makita RP2300FC Technical Information page 20

W
iring diagram
Fig. D-2D
Noise
suppressor
Grip R
Connecting lad wires
(yellow, orange purple) to
be connected to Switch in
Grip R
RP1801 with electric Brake
Wiring in Motor housing
on Grip R side (Switch side)
Lead Wire
Holder
Switch lever
When putting Lead wires for
connecting to Terminal block,
into this Lead wire holder,
Noise suppressor's thin Lead wire
(white) has to be put under the
following Lead wires.
* Support unit's lead wire (black)
* Thick Connecting lead wire (purple)
for connecting Switch to Terminal
block
Terminal block
P 20/ 27