Wiring Diagram - Makita RP2300FC Technical Information

W
iring diagram
Fig. D-2A
RP2301FC with electric Brake, LED Job Light, Electronic Control
Grip R
Connecting Lead Wires
(yellow, orange purple) to
be connected to Switch in
Grip R
Wiring in Motor housing
on Grip R side (Switch side)
Lead Wire
Holder
Switch lever
When putting Lead wires for
connecting to Terminal block,
into this Lead wire holder,
Controller's thin Lead wire (purple)
has to be put under the following
Lead wires.
* Controller's thick Lead wire (red)
* Thick Connecting lead wire (purple)
for connecting Switch to Terminal
block
Terminal block
The extra portion of Controller's
thin Lead wires (black, red) to be
connected to LED has to be put
in this position.
Connector of Controller's lead wires
has to be connected to LED circuit
that facies Lead wire (Red) to Red
marking side.
And put the Lead wires into Lead
wire holder.
Lead wire holder
Controller's Lead wire (red)
P 11/ 27
Connector
of Controller
Red marking