Download Print this page

Shaft Lock - Makita RP2300FC Technical Information

Router
Hide thumbs Also See for RP2300FC:

Advertisement

R
epair
[3] DISASSEMBLY/ASSEMBLY
[3]-2. Armature, Motor bracket complete (cont.)
ASSEMBLING
(5) Assemble Grip L to Motor bracket on Lock lever side and secure it with M6x25 Pan head screw. Refer to Fig. 15.
Assemble Grip cover L to Grip L by screwing two 4x12 Tapping screws. Refer to Fig. 15.
(6) Assemble Armature to Motor bracket. Refer to Fig. 13
(7) Assemble Retainer to Armature shaft by turning with Wrench 41 or Hex socket 41-80 clockwise. Refer to Fig. 12.
(8) Assemble Motor bracket to Motor housing. Refer to Fig. 11.
(8) In case of Models RP1800F, RP1801F, RP2300F, RP2301FC, connect LED circuit. Refer to Fig. 10.
(9) Assemble Grip R section to Motor bracket. Refer to Fig. 9.
(10) Secure Grip cover (R) with two 4x18 Tapping screws to the Grip R. Refer to right illustration in Fig. 8.
And assemble Cover to Motor housing. Refer to left illustration in Fig. 8.
(11) Mount Retainer cover to Motor bracket. Refer to right illustration in Fig. 7. And assemble Carbon brushes and
Collet nut. Refer to left illustration in Fig. 7.

[3]-3. Shaft Lock

DISASSEMBLING
(1) Separate Base section from Motor section as illustrated in Figs. 2, 3.
(2) Remove Retainer cover by unscrewing two M4x18 Pan head screws as the right illustration in Fig. 7.
(3) Shaft lock mechanism can be disassembled as illustrated in Fig. 19.
Fig. 19
1R268
Push button
Retainer
cover
Applying 1R268 to the pin hole of Push button,
strike Collared pin 6 through the pin hole of
Push button.
Collared pin 6 can be removed from Push button.
ASSEMBLING
Shaft lock section can be assembled as illustrated in Fig. 20.
Fig. 20
Splinter of
Push button
Collared pin 6
Remove Splinter of Push button
from Collared pin 6.
Collared pin 6 and Compression spring 8
are removed from Push button.
Splinter of
Push button
Note: The removed Push button has to be replaced with new Push button.
Push Button
Compression spring 8
Collared pin 6
Set the parts to Retainer cover
as illustrated above.
Push button
Compression spring 8
Collared pin 6
Push button
Collared pin 6
Retainer
1R030
cover
Supporting Collared pin 6 with 1R030,
assemble Push button by pressing with
Arbor press.
Note: Use new Push button.
P 9/ 27
Retainer
cover

Advertisement

loading

This manual is also suitable for:

Rp2301fc