Makita RP2300FC Technical Information page 12

W
iring diagram
Fig. D-3A
RP2301FC with electric Brake, LED Job Light, Electronic Control
Support unit
Controller
Put Controller into
the above illustrated
position.
Support unit's Lead wire (orange)
Support unit's Lead wire (yellow)
RP2301FC with electric Brake, LED Job Light, Electronic Control
Connect Insulated connector to
Switch terminal 2 while keeping
it away from Boss.
Switch terminal 2
Wiring in Motor housing
on top side (Rear cover side)
Support unit's Lead wire (black)
Wiring in Grip (R)
Insulated connector
Lead wire holder
When putting Support unit's Lead wires
into Lead wire holders, put them as follows.
* Support unit's Lead wire (black)
into Lead wire holder of outside
* Support unit's Lead wires (orange, yellow)
into Lead wire holder of inside
Boss
P 12/ 27