Functional Overview; Front; Back; Installation - Danfoss CF-RC Instruction

Instruction
1. Functional Overview
1.1 Front (fig. 1)
 Display.
 Soft key 1.
 Soft key 2.
 Up/down selector.
 Left/right selector.
 Icon for system alarm.
 Icon for communication with Master Controller.
 Icon for switch to 230 V power supply.
 Icon for low battery level.
1.2 Back (fig. 2)
 Back plate/docking station.
 Battery compartment.
 Screw hole for wall mounting.
 Screw and wall plug.
 Transformer/power supply plug.
Note: CF-RC Remote Controller has a self-explanatory menu structure. All settings are easily
carried out with the up/down and left/right selectors in combination with the soft keys.
When the display back light is out, the first touch of a button only activates this light.

2. Installation

2.1 Preparations

• Install Remote Controller after you have installed all room thermostats.
• Remove the protection strip to connect the enclosed batteries.
• Carry out the assignment of Remote Controller to Master Controller within a distance
of 1.5 m.
• When the display back light is out, the first touch of a button only activates this light.
2.2 Activate Install mode on Master Controller (fig. 3)
• Use the menu selection button  to select Install mode. The install LED  flashes.
• Activate Install mode by pressing OK . The install LED  goes ON.
4
Danfoss Heating Solutions
CF-RC Remote Controller
VIUHM602 © Danfoss 03/2011