Alarms - Danfoss CF-RC Instruction

Instruction

5.4 Alarms

If an error occurs in the CF2
the Remote Controller display:
When the alarm is acknowledged with OK, the Master Controller buzzer will go off (if set
to Sound On, see chapter 5.3), and the CF2
cated on the start-up screen:
This indication of Alarm on Remote Controller and the indication on Master Controller
will continue until the error that caused the alarm has been fixed.
An Alarms menu will be present at the top of the Menu list, activated from the start-up
screen:
Activating the Alarms menu with OK provides access to an Alarm status with a descrip-
tion of the error causing the alarm. Select the Alarm log to get specific information about
the error causing the alarm and the time for its registration by the system.
© Danfoss 03/2011
CF-RC Remote Controller
system, it is indicated by Master Controller and directly on
+
An alarm has occurred.
Press key to acknowledge.
OK
system will switch to Alarm status as indi-
+
16:14
Kitchen
20.0°C
Status
Alarm
Menu
Menu
Alarms
Rooms
Program
Setup
OK
VIUHM602
Tue. 26. July 05
Back
Danfoss Heating Solutions
11