Relay Configuration - Danfoss CF-RC Instruction

Instruction
6.1.6 Relay configuration
Menu  Setup  Service  Relay configuration: Activate Relay configuration to get a list
of connected relays.
Select a relay function and press Change to get a configuration menu.
The following table list the relay options for different functions (default value in Italic).
Function Relay Option
MC1 Pump None
MC1-Pump (delay)
MC1-Pump (no delay)
Wireless (delay)
Wireless (no delay)
MC2 Pump None
MC1-Pump (delay)
MC1-Pump (no delay)
MC2-Pump (delay)
MC2-Pump (no delay)
Wireless (delay)
Wireless (no delay)
Note: If a relay is already selected for another function, it displays in grey and is not selectable.
© Danfoss 03/2011
CF-RC Remote Controller

Relay configuration

MC1 Pump
MC2 Pump
MC3 Pump
Boiler MC1-Boiler (no-delay)
Chiller
Change
MC1 Pump
None
MC1-Pump (delay)
MC-1 Pump (no delay)
Wireless (delay)
Wireless (no delay)
Change
VIUHM602
MC1-Pump (delay)
MC2-Pump (delay)
MC3-Pump (delay)
Wireless
Back
Back
Function Relay Option
MC3 Pump None
MC1-Pump (delay)
MC1-Pump (no delay)
MC2-Pump (delay)
MC3-Pump (no delay)
Wireless (delay)
Wireless (no delay)
Boiler None
MC1-Boiler (no delay)
Wireless (no delay)
Chiller None
MC1-Pump
Wireless
Danfoss Heating Solutions
15