Danfoss CF-RC Instruction page 9

Hide thumbs Also See for CF-RC:

Table of Contents

Instruction

Select time for the setback program by defining the time periods with normal room tem-

perature, indicated by the black bars above the time line (the periods outside the black

bars are the setback periods with reduced room temperature).

Set start and end times by means of the left/right selector and by toggling between them

using the up/down selector (fig. 1- /).

Note: A period with normal room temperature is removed by setting start and end to the

same time. The period is recreated by means of the up/down and left/right selectors.

Confirm with Ok to activate an overview of the created program (the days selected in the

program are indicated by bold letters).

Activate the program with Ok.

Cancel program

A created program can be deleted with the Cancel Program menu leading to the over-

view illustrated above.

Note: In the Options menu, the created programs (1-3) will be indicated by more distinct

capitals.

Note: If you want to override a setback period in a room, you can do so with the Override

setback function in the Options menu for each room (see chapter 5.1.1).

Setback temperature

In the Setback program (see chapter 5.2.2), activate the Setback temperature menu to

set the room temperature reduction from 1 to 10°C during setback periods.

CF-RC Remote Controller

Program 1

Activate?

VIUHM602

Cancel

Danfoss Heating Solutions

Table of Contents

088u0221