Setback Program - Danfoss CF-RC Instruction

Instruction
5.2.2 Setback program
Menu  Program  Setback program  Program setback: From the Program menu, se-
lect Setback program  Program setback to divide rooms in (up to) six zones with (up to)
three different programs for reduced room temperature at different times during the day.
Add rooms to a zone: Select a zone to see the rooms attached to the zone.
Select Options  Add room to add new rooms to the zone (as default, all rooms are as-
signed to Zone 1).
To move a room to a different zone, just allocate it to the desired zone.
Example: Kitchen is moved from Zone 1 to Zone 3.
Create programs for a zone: Select Options  Program 1/2/3 to create a setback pro-
gram. Confirm with OK to activate the week calendar.
Use up/down and left/right selectors (fig. 1- /) to select days for this program by
moving them above the horizontal line. Confirm with Ok to select time for the setback
program.
8
Danfoss Heating Solutions
CF-RC Remote Controller
Zone 3 - Add room
Kitchen (1)
Bath room (1)
Living room (2)
Yes
Program 1
Select days
+ M T
- S
Ok
Program 1
Select time
00 06 12
<06:00>
Ok
VIUHM602
No
∧
W
T F S
∨
Cancel
18 24
Cancel
© Danfoss 03/2011