Table of Contents
Advertisement
5.4 Alarms
If an error occurs in the CF2 system, it is indicated by the Master
Controller and directly on the Remote Controller Display:
GB
When the alarm is acknowledged with OK, the Buzzer of the Master
Controller will go Off (if set to Sound On, see chapter 5.3), and the
CF2 system will switch to Alarm status as indicated on the start-up
screen:
This indication of Alarm on the Remote Controller and the indication
on the Master Controller will continue until the error that caused the
alarm has been fi xed.
An Alarms menu will be present at the top of the Menu list activated
from the start-up screen:
Danfoss Heating
13
Advertisement
Table of Contents
Need help?
Do you have a question about the CF-RC and is the answer not in the manual?
Questions and answers