Leds; Power Status Led; Rps Status Led; Mode Led - H3C S5120-SI Installation Manual

LEDs

Table 12 LEDs at a glance
LED

Power status LED

RPS status LED

Mode LED

10/100/1000Base-T
autosensing Ethernet port
status LED
1000Base-X SFP port
status LED
Power status LED
The power status LED (Power) indicates the operating status of the switch.
Table 13 Power status LED description
LED
Power
RPS status LED
The H3C S5120-28P-HPWR-SI switch provides an RPS status LED on its front panel, indicating the
RPS power supply status for the switch.
Table 14 RPS status LED description
LED
RPS
Mode LED
The S5120-9P-PWR-SI, S5120-9P-HPWR-SI, S5120-28P-PWR-SI, and S5120-28P-HPWR-SI
switches each provide a mode LED. The mode LED indicates the type of information that the port
Switch model
All switch models
S5120-28P-HPWR-SI
•
S5120-9P-PWR-SI
•
S5120-9P-HPWR-SI
•
S5120-28P-PWR-SI
•
S5120-28P-HPWR-SI
All switch models
All switch models
Status
Steady green
Flashing green at 1 Hz
Flashing green at 3 Hz
Off
Status
Steady green
Off
Description
The switch is operating correctly
The system is performing power-on self test (POST) or
downloading software.
POST has failed or a severe fault has occurred.
The switch has been powered off.
Description
The RPS DC input is normal.
The switch is not connected to an RPS or the RPS DC input is
abnormal.
42
Description
See "Power status LED."
See "RPS status LED."
See "Mode LED."
See "10/100/1000Base-T
autosensing Ethernet port status
LED."
See "1000Base-X SFP interface
status LED."