Installing The Switch; Installation Flow; Rack-Mounting The Switch - H3C S5120-SI Installation Manual

Installing the switch

CAUTION:
Keep the tamper-proof seal on a mounting screw on the chassis cover intact, and if you want to open
the chassis, contact H3C for permission. Otherwise, H3C shall not be liable for any consequence.

Installation flow

Figure 1 Installation flow
Install the switch
Ground the switch
Connect the power cord
Verify the Installation
Power on the switch
Operating correctly?
Install transceiver modules

Rack-mounting the switch

The switch is shipped with a pair of mounting brackets to secure and support the switch.
shows the procedure for installing the switch in a 19-inch rack.
Figure 2 Procedure for installing the switch in a 19-inch rack
Start
No
Yes
and cables
End
Troubleshoot
the switch
Power off the
switch
4
Figure 2