Other Functions; Home Function; Accessing The 121.5 Mhz Emergency Frequency (Selectable On Only The Ic-A14) - Icom IC-A14 Instruction Manual

6

OTHER FUNCTIONS

■ Home function

The Home function is convenient if you want to return the
transceiver to default settings without memory channels.
The following transceiver's settings will return to the default
value.
• Operating mode
with frequency or channel number, including bank*)
• Duplex setting • ANL setting
• Squelch level • Side tone level • Microphone gain
• Internal microphone usage • Time-Out timer setting
The default settings can be modified to suits your preference
using with the optional cloning software, CS-A14.
➥ Hold down [CLR] for 2 seconds
to return the transceiver into the
default setting.
21
(Frequency, memory or weather* channel mode
• Key touch beep
*For only the IC-A14
■ Accessing the 121.5 MHz
emergency frequency
(Selectable on only the IC-A14)
The IC-A14 can quickly be set to the 121.5 MHz emergency
frequency. This function can be activated even when the key
lock function is in use.
q Push [FUNC], then [121.5](0) to call the emergency fre-
quency.
w Push [CLR] to return to the frequency mode.
Emergency initial, "E," ap-
pears with the frequency.
[CLR]
[121.5](0)
[FUNC]