Set Mode Setting - Icom IC-A14 Instruction Manual

6
OTHER FUNCTIONS

■ Set mode setting

The Set mode is used to enter infrequently changed function
items or options.
D Entering the Set mode
q Rotate [VOL] to turn the
transceiver power OFF.
w While holding down [Y]
and [Z], rotate [VOL] to
turn ON power and enter
the Set mode.
e Push [MR] several times
to select the desired Set
mode item.
r Push [Y]/ [Z] to select the
desired option or value for
the item.
t Push [CLR] to return to the
frequency mode.
For the IC-A14 only
Push [FUNC], then hold down [SET] (ENT) for 1 second to
also enter the Set mode.
For your information:
The default value of the Set mode items can be changed
with the optional CS-A14 cloning software. The default
settings are recalled by the Home function.
25
[VOL]
[Y] [MR]
[Z]
[CLR]
D Set mode items
• ANL— ANL function
(selectable in only the IC-A14S)
Turns the ANL
(Automatic Noise Limiter)
The ANL reduces received noise components such as those
caused by engine ignition systems.
• BEEP— Key touch beep
The beep tone sounds when you push a switch.
• MIC— Microphone gain
The internal microphone gain can be set to suit your needs.
"H" (High gain), "M" (Medium gain) and "L" (Low gain) can
be selected.
function ON or OFF.
(selectable in only the IC-A14S)