Side Tone Function; Lcd Backlight; Low Battery Indicator; Basic Operation - Icom IC-A14 Instruction Manual

3

BASIC OPERATION

■ Side tone function

When using a headset
your transmitted voice to the headset for monitoring. Connect
an optional headset to use this function
and headset are required)
adapter
D Setting the side tone level
q Push [PTT] to turn ON the transmit mode.
w While transmitting, push [Y]/[Z] to adjust the level.
• 'ST--0' is OFF and 'ST--10' is the maximum level.
[PTT]
[Z]/[Y]
WARNING! NEVER operate the transceiver with a head-
set at high volume or monitor levels for a long periods
time. If a ringing in your ears occurs, reduce the volume or
monitor level, or discontinue use.
11
, the transceiver outputs
(user supplied)
(The OPC-499
. (p. 39)
Side tone level is indicated
IMPORTANT!
Select 'ST--0' when a speaker
microphone is connected, oth-
erwise your voice will be heard
from the speaker during trans-
mit.

■ LCD backlight

The IC-A14/S has an LCD backlight for convenience during
night time operation.
headset
➥ Push [LIGHT] to turn the LCD
backlight ON or OFF.
IMPORTANT!
Turn OFF the LCD back-
light when no backlight is
necessary.
■ Low battery icon
The low battery icon appears or blinks when the battery
power has decreased to a specified level. The attached bat-
tery pack or battery case requires recharging or the battery
case cells need replacing.
If the batteries are not charging or replaced, even when the
low battery indicator blinks, a long beep sounds and then the
transceiver will automatically turn OFF.
[LIGHT]
Appears when the battery
is nearly exhausted.
Blinks when the battery
recharging or replacing is
immediately necessary.