Technical Specifications - GE MDS SD Series Technical Manual

8.5 Technical Specifications

GENERAL
Frequency Range
Specific frequency authorizations are dependent on the type-approval of the radio. Consult factory for details.
Occupied Bandwidths
NOTE: This information subject to change depending on specific modem configuration. For emission designator information,
consult the FCC website for latest "GE MDS" grants: http://transition.fcc.gov/oet/ea/fccid/. Emission designators are subject
to change pending new FCC additions and approvals.
RECEIVER
Maximum Usable Sensitivity
NOTE: Typical sensitivity rating at 9600 BPS. See modem type listing in Section 6.0 for detailed ratings.
TRANSMITTER
Carrier Power
Power Measurement Accuracy
Duty Cycle
Output Impedance
FCC ID
96
SD1: 150-174 MHz
SD2: 216-235 MHz in one of the following bands:
Band A — 216 to 220 MHz
Band B — 220 to 222 MHz
Band C — 220 to 235 MHz
Band D — 216 to 220 MHz (50 kHz B/W)
SD4: 300–512 MHz in one of the following bands:
Band A — 350 to 400 MHz
Band B — 400 to 450 MHz
Band C — 450 to 512 MHz
Band D — 300-360 MHz
SD9: 820–960 MHz in one of the following bands:
Band A — 820 to 870 MHz
Band C — 928 to 960 MHz
Band D — 928 to 960 MHz (50 kHz B/W)
Band E — 880 to 915 MHz
Band F — 880 to 915 MHZ (50 kHz B/W)
Band G — 850 to 860 MHz/926 to 936 TX LO
Band H — 850 to 860 MHz/926 to 936 TX HI
Band I — 915 to 941 MHz
Band J — 880 to 915 MHz TX/928 to 960 MHz RX
Band K –- 928 to 960 MHz TX/880 to 915 MHz RX
SD1: 6.25,12.5, 25.0 kHz
SD2: 5.0, 6.25, 9.0, 12.5, 25.0, 50.0 kHz
SD4: 6.25, 12.5, 25.0 kHz
SD9: 5.0, 12.5, 25.0, 50.0 kHz
–6
–112 dBm at 1x10 BER (9600 BPS)
0.1 Watts to 5 Watts
+/- 1.5 dB
Continuous
50 Ω
SD1: E5MDS-SD1
SD2: E5MDS-SD2-1
SD Series Technical Manual MDS 05-4846A01, Rev. I