Performance - GE MDS SD Series Technical Manual

•
Alarm Signal Sense
tive high means that Pin 6 on the
exists. (This is the default behavior.) An active low means that Pin 6 on the
will output a low DC signal when an alarm exists. Select the desired behavior in the drop-
down box and click
•
Set Signal by Class
ing produced by the alarm output line. The choices are:
Never assert Alarm Signal
Assert Signal on Major Alarm
Assert Signal on Major or Minor Alarm
Assert Signal on Any Alarm or Status
• — This button is used to set the selections made in the check box list below
Set Alarm Bits
it. First, you must select which specific alarms will result in a signal being produced by
the alarm output line. To set an alarm/message for reporting by the output line, you click
the check box next to an item of interest. To clear a check box, simply click it again.
When you are finished with the selections, click the
• — This button is used to return the screen to its original selections. It clears any se-
Undo
lections made prior to clicking the

Performance

Radio Performance
This screen contains several measurement parameters that can be used to check the operating
conditions of the radio.
MDS 05-4864A01, Rev. I
— This parameter may be set to either
COM2
Set Alarm Signal Sense
— Here, you can specify what classes of alarms result in an signal be-
Set Alarm Bits
SD Series Technical Manual
Active High
port will output a high DC signal when an alarm
to apply the setting.
Set Alarm Bits
button.
or . An ac-
Active Low
port
COM2
button.
71