GE MDS SD Series Technical Manual page 77

NOTE If web access has been disabled accidently via the web Device Manager, the user must
re-enabled it via the console or Telnet interface.
Wireless Security
•
Payload Encryption
lection is .
OFF
Login Password
•
Administrator Password
is normally set to the default entry of
time of installation to one that is known only to the Administrator or authorized user of
the system. The password should be changed periodically to maintain the best security.
Passwords are case sensitive and may use up to 13 alpha-numeric characters. Do not use
punctuation mark characters. You will be required to enter the current password to set a
new one. Follow the prompts, and refresh your web browser (typically
at the top menu bar) to apply the change to all pages.
View>>Reload
TIP: For enhanced security, consider using misspelled words, a combination of letters and
numbers, and a combination of upper and lower case letters. Also, the more characters
used (up to 13), the more secure the password will be. These strategies help protect
against sophisticated hackers who may use a database of common words (for example,
dictionary attacks) to determine a password.
MDS 05-4864A01, Rev. I
— When on, applies encryption to payload data stream. The default se-
— When the transceiver is shipped from the factory, the password
admin
SD Series Technical Manual
. It is recommended that it be changed at the
or
View>>Refresh
67