GE MDS SD Series Technical Manual page 45

Task
If you wish to...
Category
Set RF Output Power, Modem Type, RX/TX
Frequency
View/Set OTA Compression
View/Set Soft-Carrier Dekey status, RX/TX
Time-Out options
View/Set Data-Key and RTS-Key settings
(ON/OFF)
View/Set Push-to-Talk/Clear-to-Send Delay
times (ms)
View/Set Automatic Frequency Correction
(AFC) setting
View/Set Switched Carrier ON/OFF setting (B
Modems)
Configure Listen-Before-Transmit (LBT)
collision avoidance
View Received Signal Strength (RSSI) level
Key the radio transmitter, view power output
View local radio emissions to locate possible
interference sources.
MDS 05-4864A01, Rev. I
Table 11. Device Manager Quick Reference
SD Series Technical Manual
Refer to this
Screen/Section
Configuration>>Radio,
Basic Settings, Page 40
Configuration>>Radio,
Packet Settings, Page 44
Configuration>>
Radio>>
Advanced Settings, Page
48
Configuration>>
Radio>>Packet Settings,
Page 44 &
Advanced Settings, Page
48
Configuration>>
Radio>>
Advanced Settings, Page
48
Configuration>>
Radio>>
Advanced Settings, Page
48
Configuration>>
Radio>>
Advanced Settings, Page
48
Configuration>>
Features>>
LBT Settings, Page 52
Maintenance & Status>>
Performance, Page 71
Maintenance & Status>>
Radio Test>>
RF Keying Test, Page 75
Maintenance & Status>>
Radio Test>>
Spectrum Graph, Page 75
35