GE MDS SD Series Technical Manual page 80

This menu is read only.
Status Conditions and Events
This screen shows status conditions reported since power-up of the transceiver. This includes
normal, informational events such as booting up the system and re-initializing.
This menu is read only.
Alarm Signal Configuration
This screen contains settings to determine what events are detected, and what will be done with
them. At the bottom section of the screen are selections for displaying specific alarms, condi-
tions, and informational events that will be reported. Select events to be reported by clicking the
box to the left of the item. The sample image below shows the first six events in the bottom por-
tion of the screen. Additional listings are visible by scrolling down.
70 SD Series Technical Manual MDS 05-4846A01, Rev. I