Copy Image
•
— Shows the firmware package currently being used by the transceiver (1 or
Active Image
2).
•
— Shows the version of firmware package 1.
Package 1
•
— Shows the version of firmware package 2.
Package 2
•
— Click this button to copy the currently active firmware to the inactive image.
Copy
Device Reboot
•
— Shows the firmware package currently being used by the transceiver (1 or
Active Image
2).
•
— Shows the version of firmware package 1.
Package 1
•
— Shows the version of firmware package 2.
Package 2
•
— Allows selection of the firmware image to use when rebooting:
Image
age, Image 1, Image 2, Inactive Image
•
— Initiates reboot of the radio with the selected firmware image.
Reboot
Authorization Codes
This screen allows the entry of a new authorization key to change the enabled features of the ra-
dio. The enabled features are not displayed here, but can be viewed using a Serial/Telnet session,
under the
Authorization Codes
80
.
menu.
SD Series Technical Manual
Current active Im-
MDS 05-4846A01, Rev. I