Chapter 0 Preface; Preface; Product Inspection - IMO iDrive Instruction Manual

Ac micro-inverters for small 3-phase induction motors 100v series, 1-ph / 0.2 – 0.75kw 200v series, 1-ph & 3-ph / 0.2 – 2.2kw 400v series, 3-ph / 0.75 – 2.2kw
Table of Contents

Advertisement

0.1 Preface

To extend the performance of the product and ensure your safety, read this manual thoroughly before
using the inverter. Should there be any problem in using the product that can not be solved with the
information provided in the manual, contact your nearest IMO distributor or the company from who
you purchased the inverter from.
Precautions
The inverter is an electrical / electronic product. For your safety, there are symbols such as "Danger"
and "Caution" in this manual to remind you to pay attention to safety instructions on carrying,
installing, operating, and checking the inverter. Be sure to follow the instructions carefully for safety.
Danger
Caution
Do not touch any circuit boards
after turning the power off.
Do not connect any wires
circuit boards when the inverter is in operation.
Do not disassemble the inverter and modify in
Connect the ground terminal of the inverter correctly. Always follow loca
regulations.
Do not perform a high voltage insulation test on parts inside the inverter. High voltages can
easily destroy the inverter's semiconductor components.
Do not connect T1 (U), T2 (V), and T3 (W) terminals of t
CMOS ICs on the inverter's main board are sensitive to static electricity.
Do not touch the main p c board even when power is off, or damage may o
0

.2 Product Inspection

iDrive EDX inverters have all passed a full function test before delivery. Please check the
following when you receive and unpack the inverter:
The model and capacity of the inverter is the same as
Is there any damage caused by transportation? If so, do not apply power.
Contact IMO distributor or sales representative if any of the above are fou

Chapter 0 Preface

Indicates a potential hazard that may cause death or serious personal
injury if misused
Indicates that the inverter or a mechanical system might be damage
misused
Danger
or internal parts un
when the inverter is powered. Do not check parts and signals on
til the charge indicator is extinguished
ternal wires, circuits and parts.
Caution
he inverter to AC power source.
those specified on your order.
0-1
Chapter 0 Preface
d if
l / national
ccur.
nd to be incorrect..

Hide quick links:

Advertisement

Table of Contents
loading

Table of Contents