Zero Adjust Mode - Chauvet INTIMIDATOR HYBRID 140SR User Manual

O
PERATION

Zero Adjust Mode

The Intimidator Hybrid 140SR contains a passcode protected mode which allows the user to calibrate and
adjust several of the product's operating parameters.
In order to access this mode, do the following:
1. Press and hold <MENU> for at least 3 seconds.
2. Use <UP> (increases the selected value) and <DOWN> (selects the next value) to enter the
passcode: 2323.
3. Press <ENTER>.
In this mode, the starting positions for the following can be adjusted:
To adjust the starting position of one of these parameters, follow the instructions below:
1. Access the Zero Adjust mode.
2. Use <UP> or <DOWN> to select the parameter to be adjusted.
3. Press <ENTER>.
4. Use <UP> or <DOWN> to increase or decrease the selected value, from 000–255.
5. Press <ENTER>.
Intimidator Hybrid 140SR User Manual Rev. 2
P D
ARAMETER
PAN
TILT
COLOR
GOBO2
GOBO1
GOBO1 ROTATE
PRISM1
PRISM2
FOCUS–GOBO1
FOCUS–GOBO2
ZOOM
FROST
SHUTTER
F
EFAULT UNCTION
048 Pan motor
146 Tilt motor
139 Color wheel
059 Static gobo wheel
121 Rotating gobo wheel
147 Gobo rotation assembly
119 8-facet prism assembly
174 6-facet prism assembly
160 Auto-focus gobo 1
165 Auto-focus gobo 2
157 Zoom assembly
145 Frost assembly
136 Shutter assembly
Page 24 of 29