Configuration (Dmx); Starting Address; Dmx Personalities; Gobos - Chauvet INTIMIDATOR HYBRID 140SR User Manual

O
PERATION

Configuration (DMX)

The Intimidator Hybrid 140SR works with a DMX controller. Information about DMX is in the CHAUVET
DMX Primer, which is available from the Chauvet website
DMX_Primer_rev05_WO.pdf.

Starting Address

When selecting a starting DMX address, always consider the number of DMX channels the selected DMX
mode uses. If you choose a starting address that is too high, you could restrict the access to some of the
product's channels.
The Intimidator Hybrid 140SR uses up to 19 DMX channels, which defines the highest configurable
address to 494.
If you are not familiar with the DMX protocol, download the DMX Primer from www.chauvetdj.com.
To select the starting address, do the following:
1. Press <MENU>.
2. Use <UP> or <DOWN> to select Address.
3. Press <ENTER>.
4. Use <UP> or <DOWN> to select the starting address, from 001–512.
5. Press <ENTER>.

DMX Personalities

The Intimidator Hybrid 140SR has two DMX personalities, a 14-channel personality, and an 8-channel
personality.
To choose which DMX personality to use, follow the steps below:
1. Press <MENU>.
2. Use <UP> or <DOWN> to select Run Mode.
3. Press <ENTER>.
4. Use <UP> or <DOWN> to select DMX.
5. Press <ENTER>.
6. Use <UP> or <DOWN> to select the DMX personality, from 19CH or 13CH.
7. Press <ENTER>.

Gobos

Intimidator Hybrid 140SR User Manual Rev. 2
http://www.chauvetlighting.com/downloads/
Static Gobo Wheel
Rotating Gobo Wheel
Page 8 of 29