Manual Mode; Configuration (Settings); Pan Reverse; Tilt Reverse - Chauvet INTIMIDATOR HYBRID 140SR User Manual

Manual Mode

To operate the Intimidator Hybrid 140SR manually through the menu, do the following:
1. Press <MENU>.
2. Use <UP> or <DOWN> to select Run Mode.
3. Press <ENTER>.
4. Use <UP> or <DOWN> to select Manual.
5. Press <ENTER>.
6. Use <UP> or <DOWN> to select from Pan, Tilt, Color, Gobo2 (static gobo wheel), Gobo1
(rotating gobo wheel), Prism1 (8-facet), Prism2 (6-facet), Focus, Zoom, Frost, Dimmer, or
Shutter.
7. Press <ENTER>.
8. Use <UP> or <DOWN> to increase or decrease the value of the function, from 000–255.
9. Press <ENTER>.
10. Repeat steps 6-9 until the product is set as desired.

Configuration (Settings)

Pan Reverse

To set the pan orientation on the Intimidator Hybrid 140SR, follow the instructions below:
1. Press <MENU>.
2. Use <UP> or <DOWN> to select Setup.
3. Press <ENTER>.
4. Use <UP> or <DOWN> to select Pan Reverse.
5. Press <ENTER>.
6. Use <UP> or <DOWN> to select OFF (normal pan orientation) or ON (reverse pan orientation).
7. Press <ENTER>.

Tilt Reverse

To set the tilt orientation on the Intimidator Hybrid 140SR, do the following:
1. Press <MENU>.
2. Use <UP> or <DOWN> to select Setup.
3. Press <ENTER>.
4. Use <UP> or <DOWN> to select Tilt Reverse.
5. Press <ENTER>.
6. Use <UP> or <DOWN> to select OFF (normal tilt orientation) or ON (reverse tilt orientation).
7. Press <ENTER>.

Screen Reverse

To set the display orientation on the Intimidator Hybrid 140SR, follow the instructions below:
1. Press <MENU>.
2. Use <UP> or <DOWN> to select Setup.
3. Press <ENTER>.
4. Use <UP> or <DOWN> to select Screen Reverse.
5. Press <ENTER>.
6. Use <UP> or <DOWN> to select OFF (normal display orientation) or ON (reverse display
orientation).
7. Press <ENTER>.

Pan Angle

To set the pan angle range on the Intimidator Hybrid 140SR, do the following:
1. Press <MENU>.
2. Use <UP> or <DOWN> to select Setup.
3. Press <ENTER>.
4. Use <UP> or <DOWN> to select Pan Angle.
5. Press <ENTER>.
6. Use <UP> or <DOWN> to select from 540 (540°), 360 (360°), or 180 (180°).
7. Press <ENTER>.
Page 17 of 29 Intimidator Hybrid 140SR User Manual Rev. 2
O
PERATION