Mounting; Orientation; Rigging - Chauvet INTIMIDATOR HYBRID 140SR User Manual

Mounting

Before mounting the product, read and follow the safety recommendations indicated in the

Orientation

The Intimidator Hybrid 140SR may be mounted in any position; however, make sure adequate ventilation
is provided around the product.

Rigging

• Before deciding on a location, always make sure there is easy access to the product for
maintenance and programming purposes.
• Make sure adequate ventilation is provided around the product.
• Make sure that the structure or surface onto which you are mounting the product can support the
product's weight. (see the
• When mounting the product overhead, always use a safety cable. Mount the product securely to a
rigging point, whether an elevated platform or a truss.
• When rigging the product onto a truss, use a mounting clamp of appropriate weight capacity.
• When power linking multiple products, mount the products close enough for power linking cables to
reach.
• The bracket adjustment knobs allow for directional adjustment when aiming the product to the
desired angle. Only loosen or tighten the bracket knobs manually. Using tools could damage the
knobs.
• The rubber feet also serve as floor supports. When mounting the product on the floor, make sure
that the product and cables are away from people and vehicles.
Mounting Diagram
Page 5 of 29
Technical Specifications)
Mounting Clamp
(such as CLP-15 from Chauvet)
Mounting Bracket
Safety Cable
(such as CH-05 from
Chauvet)
Rubber Feet for Floor
Mounting
(x4)
Intimidator Hybrid 140SR User Manual Rev. 2
S
ETUP
Safety Notes.