Table of Contents
Advertisement
Reset Function
To reset specific functions or the entire product:
1. Go to the Settings main level.
2. Select the Reset Function option.
3. Select the functions to reset, from:
•
Pan/Tilt
•
Iris/Prism
•
Color/CMY/Blade
•
Gobo/Gobo Rotate
•
Frost/Animation
or
•
All
4. Select NO (to cancel) or YES (to reset the selected functions).
Factory Reset
To reset the product to factory settings:
1. Go to the Settings main level.
2. Select the Factory Reset option.
3. Select NO (to cancel) or YES (to reset the product configuration).
Test Mode
Auto Test
To have the Maverick MK3 Profile automatically test all functions one after the other:
1. Go to the Test main level.
2. Select the Auto Test option.
Manual Test
To manually test an individual function of the Maverick MK3 Profile:
1. Go to the Test main level.
2. Select the Manual Test option.
3. Select a function to test, from Pan, Pan Fine, Tilt, Tilt Fine, P/T Speed, Dimmer, Dimmer Fine,
Shutter, Virtual Shaking, Cyan, Magenta, Yellow, CTO, Color, Gobo, Gobo Rotate, Gobo
Index, Gobo2, Animation, Animation Rotate, Blade1- 1, Blade1- 1 Fine, Blade1- 2, Blade1- 2
Fine, Blade2- 1, Blade2- 1 Fine, Blade2- 2, Blade2- 2 Fine, Blade3- 1, Blade3- 1 Fine, Blade3-
2, Blade3- 2 Fine, Blade4- 1, Blade4- 1 Fine, Blade4- 2, Blade4- 2 Fine, Blade Rotate, Blade.
Rota Fine, Focus, Focus Fine, Focus Auto, Zoom, Zoom Fine, Prism, Prism Rotate, Prism2,
Prism2 Rotate, Iris, Frost, Frost2, CRI Filter, CMY Macro, CMY Macro Speed, or Special
Function.
4. Increase or decrease the value of the selected function from 000–255 to test it.
System Information
The information section of the menu displays statistics and the current status of the product's various
functions. To view these information sections:
1. Go to the Information main level.
2. Select which information to view, from Fixture Information (shows the firmware version, running
mode, addresses, temperature, and running time), Fan Information (shows the speed of the fans
in rotations per minute (rpm)), Error Information (shows any error or No Error!), or Channel
Information (shows the current values of all signal input channels).
3. If necessary, scroll up and down to view all information available in the selected option.
Offset Mode (Zero Adjust)
The Offset mode provides fine adjustments for the home position of every moving part in the optical path
as well as the pan and tilt movements. To adjust these options and prevent borders showing or reduction of
the light output:
1. From the main level screen, press and hold <MENU> until the passcode screen appears.
2. Enter the passcode: 2323 and press <ENTER>.
3. Select the "zero" position to adjust, from PAN, TILT, COLOR, GOBO, GOBO ROTATE, GOBO2,
ANIMATION, FOCUS-GOBO, FOCUS-GOBO2, ZOOM, PRISM, PRISM2, PRISM ROT, IRIS,
FROST, FROST2, CRI Filter, CYAN, MAGENTA, YELLOW, CTO, BLADE1- 1, BLADE1- 2,
BLADE2- 1, BLADE2- 2, BLADE3- 1, BLADE3- 2, BLADE4- 1, BLADE4- 2, BLADE ROTATE,
DIMMER1, DIMMER2, DIMMER3, MAC4, MAC5, or MAC6.
4. Adjust the "zero" position for the selected function from 000–255.
Page 24 of 33
Maverick MK3 Profile User Manual Rev. 2
Operation
Advertisement
Table of Contents
