Configuration (Standalone); Automatic Programs; Sound-Active Mode; Sound Sensitivity - Chauvet INTIMIDATOR HYBRID 140SR User Manual

O
PERATION
13Ch (cont.)
C F
HANNEL UNCTION
13 Shutter

Configuration (Standalone)

Set the product in one of the standalone modes to control without a DMX controller.
Never connect a product that is operating in any standalone mode to a DMX string
connected to a DMX controller. Products in standalone mode may transmit DMX
signals that could interfere with the DMX signals from the controller.

Automatic Programs

To run the Intimidator Hybrid 140SR in automatic mode, follow the instructions below:
1. Press <MENU>.
2. Use <UP> or <DOWN> to select Run Mode.
3. Press <ENTER>.
4. Use <UP> or <DOWN> to select Auto.
5. Press <ENTER>.

Sound-Active Mode

To run the Intimidator Hybrid 140SR in sound-active mode, do the following:
1. Press <MENU>.
2. Use <UP> or <DOWN> to select Run Mode.
3. Press <ENTER>.
4. Use <UP> or <DOWN> to select Sound.
5. Press <ENTER>.

Sound Sensitivity

To change the sound sensitivity on the Intimidator Hybrid 140SR, follow the instructions below:
1. Press <MENU>.
2. Use <UP> or <DOWN> to select Setup.
3. Press <ENTER>.
4. Use <UP> or <DOWN> to select Sensitivity.
5. Press <ENTER>.
6. Use <UP> or <DOWN> to increase or decrease the sound sensitivity, from 001–100.
7. Press <ENTER>.
The product will only respond to low frequencies of music (bass and drums).
Intimidator Hybrid 140SR User Manual Rev. 2
V P /S
ALUE ERCENT ETTING
000 007 Closed

008 015 Open

016 131 Strobe, slow to fast

132 167 Slow open, fast close, slow to fast

168 203 Fast open, slow close, slow to fast

204 239 Pulse strobe, slow to fast

240 247 Random strobe, slow to fast

248 255 Open

Page 16 of 29