Welch Allyn 1500 Directions For Use Manual page 114

110
Settings
Event log screen and CO
The event log screen provides software versions, module status and provides an event
log. Full details are provided in the service handbook.
This screen also provides a counter for CO
The event log screen is displayed as follows:
The following is a typical screen:
The CO
module until calibration is necessary. If the counter is 0 when a CO
an alert message is displayed: CO
Welch Allyn service center.
calibration
2
Setup Menu > Administrator > System > Event log
Hours Until Cal Due, is a counter that gives the operating time of the CO
2
calibration.
2
calibration due or CO
2
Welch Allyn 1500 Patient Monitor
probe is connected,
2
service due. Please contact a
2
2