Table of Contents
Advertisement
30
Operation
Displaying trend data in the measurements screen
The HR trend can also be displayed in the waveforms:
Press the Setup button
The trend data can be displayed in waveform 2 or 3 (or 4 if ST is enabled):
Trend data can be displayed for any of the following:
•
Heart rate
•
RR (see example above)
•
etCO
•
fiCO
•
IPI when selected in parameter display)
•
SpO
•
P1, P2, P3 P4
•
NIBP
•
T1
•
T2 (when selected in parameter display)
•
ΔT (when selected in parameter display)
•
CO or CI (when selected in parameter display)
Note
. and select Waveforms. Scroll down for more options.
2
2
2
When the trend waveform is displayed and it is highlighted and selected with
the trim knob (see next page), options appear at the bottom of the waveform (as
shown on the example above) to:
•
Change the interval (15 mins to 24 hours)
•
Change the waveform scale
•
Obtain a printout.
Welch Allyn 1500 Patient Monitor
Advertisement
Table of Contents
