Erase Fault Memory - Audi A8 1994 Service Manual

-> Readout on VAS 5051:
1 - Basic setting
2 - Display group 2
3 - Default position learned
- Control unit now recognises this position as being the default position
Note:
Entry in fault memory ("Headlights not adjusted") is erased and control mode re-activated.
- Terminate function "04 - Basic setting" by touching ◂ key.

5.8 - Erase fault memory

Note:
If fault memory cannot be erased, interrogate fault memory again and eliminate fault.
Requirements:
• Fault memory interrogated => Page
• All faults eliminated
Sequence of operations
After fault memory interrogation:
-> Readout on VAS 5051:
- From list -1- select diagnostic function "05 - Erase fault memory".
Electrical system Self-diagnosis 02.99 ➤ - Edition 05.2002
Protected by copyright. Copying for private or commercial purposes, in part or in whole, is not
permitted unless authorised by AUDI AG. AUDI AG does not guarantee or accept any liability
with respect to the correctness of information in this document. Copyright by AUDI AG.
147
Audi A8 1994 ➤
155
5.7 - Basic setting