Audi A8 1994 Service Manual page 29

1) Valid specifications can be found in "Maintenance" booklet.
=> Maintenance
Measured value block 014
Read measured value block 14
Channel 44
1) Valid specifications can be found in "Maintenance" booklet.
=> Maintenance
Measured value block 015
Read measured value block 15
Channel 45 X
Oil grade
▪ Entries between 1 and 4 are possible 1)
Adaption channel for oil grade
1) Valid specifications can be found in "Maintenance" booklet.
=> Maintenance
Note:
Adaption to oil grade must be carried out after every service.
Measured value block 016
Protected by copyright. Copying for private or commercial purposes, in part or in whole, is not
permitted unless authorised by AUDI AG. AUDI AG does not guarantee or accept any liability
with respect to the correctness of information in this document. Copyright by AUDI AG.
Display group 16
47 XXX
Electrical system Self-diagnosis 02.99 ➤ - Edition 05.2002
730
Max. time interval
▪ 730 = 730 days/1 year 1)
Adaption channel for maximum time interval prior to service
⇒
Channel 46 XXX
Adaption channel for total consumption (petrol engines only)
48 XXX
Adaption channel for thermal load (diesel engines only)
Arithmetic value for amount of soot in engine oil
◂ Indicated on display
⇒
◂ Indicated on display
Arithmetic value for total consumption
◂ Indicated on display
Arithmetic value for thermal load
1.10 - Read measured value block
Audi A8 1994 ➤
25