Audi A8 1994 Service Manual page 69

All models:
- Change adaption value by means of direct entry => "B - Changing adaption value by means of direct entry",
Page 32 .
- Enter 5-digit adaption value. Use "0" to fill up blanks.
Example:
Desired input: 768 with dash panel insert and tyre pressure monitor
Keypad entry: 00768
Protected by copyright. Copying for private or commercial purposes, in part or in whole, is not
permitted unless authorised by AUDI AG. AUDI AG does not guarantee or accept any liability
with respect to the correctness of information in this document. Copyright by AUDI AG.
-> Readout on VAS 5051 following adaption:
Example:
1 - Channel 61
Value 768 saved
- Terminate function "10 - Adaption" by touching ◂ key.
Adaption channel 62 - control units using display data bus
This function can be used to enter control units using the display data bus on dash panel insert replacement.
-> Readout on VAS 5051:
1 - Enter channel number
- Use keypad -2- to enter "62" for "Adaption channel 62" and confirm by touching Q key.
Electrical system Self-diagnosis 02.99 ➤ - Edition 05.2002
Audi A8 1994 ➤
1.15 - Adaption channels 60 to 62
65