Table of Contents
Advertisement
7 4
Seats
and storage
unattended in the vehicle - they could be
injured!
- Exercise caution when adjusting the seat
height. Unsupervised or careless seat ad-
justment can pinch fingers or hands
causing injuries.
- While the vehicle is moving, the seat-
backs of the front seats must not be in-
clined too far to the rear because the ef-
fectiveness of the safety belts and the
airbag system is severely compromised -
there is a risk of injury .
- To reduce the risk of injury in the case of
sudden braking or accident, front pas-
sengers must never ride in a moving ve-
hicle with the seatback reclined . Safety
belts and the airbag system only offer
maximum protection when the seatback
is upright and the safety belts are prop-
erly positioned on the body. The more
the seatback is reclined, the greater the
risk of personal injury from an incorrect
seating position and improperly posi-
tioned safety belts .
Seat memory
Driver's seat memory
Applies to vehicles: with seat memory
The seat adjustment settings for two drivers
can be stored using the memory buttons in
the driver's door.
Fig. 75
Driver' s door : Seat me mory
In addition to the setting for the driver 's seat,
the settings for the steering column* and
both exterior mirrors can be stored .
Storing and recalling settings
Using the memory buttons 1 and 2, you can
store and recall the settings for two different
drivers ¢
fig. 75.
The current settings are also automatically as-
signed to the remote control key being used
when the vehicle is locked. When the vehicle
is unlocked, the settings assigned to the re-
mote control key being used are automatically
recalled. This function has to be activated in
the MMI ¢
page 75, Activating remo te con-
trol key memory.
Turning seat memory on and off
If the
I
ON/O FF
I
switch is depressed, the seat
memory is inoperative. The word OFF next to
the
ION/O FF !
switch illuminates.
All the stored settings are retained. We rec-
ommend using the
I ON/O FF
I
switch and deac-
tivating the seat memory if the vehicle is only
going to be used
temporarily
by a driver
whose setting s are not going to be stored.
Storing and recalling a seat position
Applies to vehicles: with seat memory
Before you can store or recall your seat posi-
tion, the
ION/OFF
I
button must be engaged
(down) .
Storing settings
.,. Adjust the driver 's seat ¢
page 73 .
.,. Adjust the steering column* ¢
page 103 .
.,. Adjust both outside mirrors ¢
page 68.
In
the tilt-down position, the passenger mirror
can be adjusted to the preferred position
and saved in the seat memory .
.,. Press the
ISE T I
button and hold it down. At
the same time, press one of the memory
buttons for at least one second .
.,. Release the buttons. The settings are now
stored under the corresponding memory
button.
Recalling settings
.,. Driver's door open - press the desired mem-
ory button .
_..
Advertisement
Table of Contents
