End Output; Code Control Unit - Audi A8 1994 Service Manual

Note:
This erases faults stored during fault elimination e.g. on account of connectors being unplugged.

1.8 - End output

-> Readout on VAS 5051:
- From list -1- select diagnostic function "06 - End output".
Protected by copyright. Copying for private or commercial purposes, in part or in whole, is not
permitted unless authorised by AUDI AG. AUDI AG does not guarantee or accept any liability
with respect to the correctness of information in this document. Copyright by AUDI AG.
-> Readout on VAS 5051:
- Switch off ignition and unplug diagnostic connector when this display appears.

1.9 - Code control unit

Notes:
◆ Coding sets the various driver information system combination alternatives depending on equipment, coun‐
try version and engine.
◆ The coding table only lists the possible combinations applying to the Audi A8.
Explanatory notes on coding
XX
X
X
Electrical system Self-diagnosis 02.99 ➤ - Edition 05.2002
Optional extra
Country version
No. of cylinders
Audi A8 1994 ➤
1.7 - Erase fault memory
17