Basic Setting - Audi A8 1994 Service Manual

Actuation of headlight raising
- Touch ▸ key.
-> Readout on VAS 5051:
A - 2nd control element in test
2 - Headlights are raised
◆ Headlights are raised until upper end position is reached
- Touch ▸ key.
-> Readout on VAS 5051:
A - Control element test over
- Terminate function "03 - Final control diagnosis" by touching ◂ key.

5.7 - Basic setting

Basic setting must be performed following replacement of headlight, vehicle level sender or control unit. Heed
the following:
Notes:
◆ Vehicle must be in a precisely defined load status.
◆ For information on specifications and load requirements:
=> Maintenance
Sequence of operations
- Achieve uniform extension of suspension by moving body up and down several times at each wheel and
allowing vehicle to settle.
- Start automatic headlight range control self-diagnosis
=> Page 146 .
Electrical system Self-diagnosis 02.99 ➤ - Edition 05.2002
Protected by copyright. Copying for private or commercial purposes, in part or in whole, is not
permitted unless authorised by AUDI AG. AUDI AG does not guarantee or accept any liability
with respect to the correctness of information in this document. Copyright by AUDI AG.
Audi A8 1994 ➤
153
5.6 - Final control diagnosis