Audi A8 1994 Service Manual page 40

Audi A8 1994 ➤
Electrical system Self-diagnosis 02.99 ➤ - Edition 05.2002
Adaption channel 03 - Correction of fuel consumption indicator
On vehicles with driver information system (DIS), this function can be used to correct the fuel consumption
indicator if dash panel insert display does not correspond to actual fuel consumption.
-> Readout on VAS 5051:
1 - Enter channel number
- Use keypad -2- to enter "03" for "Adaption channel 03" and confirm by touching Q key.
-> Readout on VAS 5051:
1 - Channel 3
Read and test
2 - Consumption
indicator
4 - Slide bar positioned on current adaption value 100
Notes:
◆ The adaption value 100 represents the factory-set mean fuel consumption indicator resistance range.
◆ It is only possible to make entries between 85% and 115%.
◆ Entries must be made in 5% steps.
◆ Dash panel insert replacement => Page
- Use slide bar to change adaption value =>"A - Changing adaption value with slide bar", Page
Or
- Change adaption value by means of direct entry => "B - Changing adaption value by means of direct entry",
Page 32 .
- Enter 5-digit adaption value. Use "0" to fill up blanks.
Example:
Desired input: 90%
Keypad entry: 00090
Note:
Protected by copyright. Copying for private or commercial purposes, in part or in whole, is not
permitted unless authorised by AUDI AG. AUDI AG does not guarantee or accept any liability
Fault message "Function unknown or cannot be implemented at present" appears if an implausible value is
with respect to the correctness of information in this document. Copyright by AUDI AG.
entered.
36
01 - Self-diagnosis
67 .
31 .