Memory Function - Audi A8 2018 Owner's Manual

u.
co ....
N
"
N
....
0
0
:c
'<t
~
To move t he head restraint up, hold it at the
sides with both hands and slide it upward unti l
you fee l it click into place.
~
To move the head restraint down, press the
button (small arrow)¢ fig.
68
and slide the
head restraint downward.
A
WARNING
Always read and follow the applicab le warn-
ings
¢page 211.
Memory function
Description
Applies to: vehicles with memory function
-
Using the memory function, you can quickly and
eas ily store a personal seat profile for the driver
and front passenger as well as for the outer rear
seats* and recall the settings. The memory func-
tion is controlled using the remote control key
and the memory buttons in the driver's/front
passenger's door and in the rea r doors*.
The driver's seat profile is stored again and as-
signed to the remote control key each time the
vehicle is locked. When you open the door, the
seat profile is automat ically reca lled. If two pea-
Remote control
key
Driver
Seat
X
Head rest raint
X
Steering wheel*
X
Safety belt*
X
Both exterior mirrors*
X
Remote control key
Applies to: vehicles with memory function
The funct ion must be switched on so that the
driver's seat profile will be assig ned to t he re-
mote cont rol key when locking the vehicle.
~
Select: the
ICARI
function button >
Car systems
contro l but ton
>
Vehicle setting s > Driver' s
seat > Remot e control key > On.
Seat s and s t o rag e
(D
Tips
To prevent the head restraints from running
into the headline, they are automatically
moved forward or upward when the seat is
adjusted.
ple use the vehicle, it is recommended that each
person always uses the ir "own" remote control
key.
Two seat profiles can be stored using the memo -
ry buttons in the driver's/front passenger's door
respectively, and one seat profile can be stored in
each of the rear doors*. Once they are stored,
these seat profiles can be selected at any time.
The following sett ings are stored:
Memory button
Driver Front passenger Outer
rear seats*
X X X
X X
X
X X
X
(D
Tips
If you do not wish to have t he seat profile for
another driver assigned to the remote cont rol
key, switch the memory function
off
in the In-
fotai nment system or using the
!O FF !
button
¢page
60.
59