Audi A8 1994 Service Manual page 51

- Use keypad -2- to enter "33" for "Adaption channel 33" and confirm by touching Q key.
-> Readout on VAS 5051:
1 - Channel 33
Read and test
4 - Slide bar positioned on current adaption value 128
Protected by copyright. Copying for private or commercial purposes, in part or in whole, is not
Notes: permitted unless authorised by AUDI AG. AUDI AG does not guarantee or accept any liability
with respect to the correctness of information in this document. Copyright by AUDI AG.
◆ The adaption value 128 corresponds to the factory-set value.
◆ The adaption can be changed between 112 ... 144.
◆ Dash panel insert replacement => Page
- Use slide bar to change adaption value =>"A - Changing adaption value with slide bar", Page
Or
- Change adaption value by means of direct entry => "B - Changing adaption value by means of direct entry",
Page 32 .
- Enter 5-digit adaption value. Use "0" to fill up blanks.
Example:
Desired input: 134
Keypad entry: 00134
Note:
Fault message "Function unknown or cannot be implemented at present" appears if an implausible value is
entered.
Electrical system Self-diagnosis 02.99 ➤ - Edition 05.2002
67 .
Audi A8 1994 ➤
31
1.13 - Adaption channels 18 to 33
.
47