Table of Contents
Advertisement
62
Seats
and storage
Installing the head restraints
.. Slide the posts on the head restra int down
into the guides until you feel the posts click
into place.
.. Press the button @
Q
fig. 62
and slide the
head restraint all the way down. You should
not be able to pull the head restraint out of
the backrest .
So that the driver can have a better view to
the rear, the head restraints should be pushed
down completely when the rear seats are not
occupied.
A
WARNING
- Read and heed all WARNINGS
~page
131.
- Only remove the rear seat head restraints
when necessary in order to install a chi ld
seat ~
page
174.
Install the head re-
straint again im mediately once th e child
seat is removed. Driving wit hout head re-
straints or with head restra int s that are
not properly adjusted increases the risk
of serious or fata l neck injury dramatical-
ly.
@
Tips
Correctly adjusted head restraints and
safety belts are an extremely effective
comb inat ion of safety features .
Seat memory
Description
Applies to vehicles: with m emory function
The memo ry function allows you to quickly
and eas ily sto re an d recall personal seating
profiles for the driver. The memory function is
operated through the master key and the
memory buttons in the driver's door .
The drive r's sea t ing profi le is stored and as-
signed to the master key each time the vehicle
is locked. The seating profile is recalled auto -
matica lly when the vehicle is unlocked. If two
peop le use one vehicle, it is recommended
that each person always uses "their own"
master key .
Up to 2 seat profiles can be stored in the
memory buttons in the driver's door . Once
they are stored, these seat profiles can be se-
lected at any time.
In addition to the driver's seat settings, you
can also store and access t he exterior mirror
adjustment
settings* using the remote con-
tro l key or memory button.
Remote control key
Applies to vehicles: with seat memory
To assign the dr iver 's seat settings to the re-
mote control key when locking the veh icle, the
funct ion must be act ivated in the rad io or
MMI*
.. Select:
I
CAR
I
function button > Seat adjust-
ment
>
Driver's seat
>
Remote control key
>
on .Or
.. Select:
!CAR !
function button> Car sys-
tems *
control button > Vehicle settings >
Seats
>
Driver's seat
>
Remote control key
>
On.
@
Tips
If
you do not want another driver's set-
tings to be assigned to the remote key,
switch off the memory function using the
radio or MMI* or the
!OFFI
button
~page
62.
· Memory buttons
Applies to vehicles: wit h seat memory
Fig. 64
Driver's door: memory funct ion buttons
Advertisement
Table of Contents
