Accessories And Replacement Parts - Vega VEGAWELL 52 Operating Instructions Manual

3 Product description
Storage
Storage and transport
temperature
VEGACONNECT
VEGADIS 82
Measuring instrument
holder
Mounting bracket
10
Up to the time of installation, the packages must be left closed and
stored according to the orientation and storage markings on the
outside.
Unless otherwise indicated, the packages must be stored only under
the following conditions:
•
Not in the open
•
Dry and dust free
•
Not exposed to corrosive media
•
Protected against solar radiation
•
Avoiding mechanical shock and vibration
•
Storage and transport temperature see chapter "Supplement -
Technical data - Ambient conditions"
•
Relative humidity 20 ... 85 %
3.5

Accessories and replacement parts

The interface adapter VEGACONNECT enables the connection of
communication-capable instruments to the USB interface of a PC. For
parameter adjustment of these instruments, an adjustment software
such as PACTware with VEGA-DTM is required.
You can find further information in the operating instructions "Interface
adapter VEGACONNECT" (Document-ID 32628).
VEGADIS 82 is suitable for measured value indication and adjustment
of sensors with HART protocol. It is looped into the 4 ... 20 mA/HART
signal cable.
You can find further information in the operating instructions
"VEGADIS 82" (Document-ID 45300).
The measuring instrument holder is used for wall/tube mounting of
VEGABAR series 80 pressure transmitters and VEGAWELL 52 sub-
mersible pressure transmitters. Supplied reducers enable the adapta-
tion to different instrument diameters. The material used is 316L.
You can find additional information in the operating instructions
"Mounting accessory pressure" (Document-ID 43478).
The robust, heavy-duty bracket of 1.4301/304 is designed for wall
mounting VEGA instruments. The required fastening elements are
included in the shipment.
VEGAWELL 52 • 4 ... 20 mA/HART