Vega VEGAWELL 52 Operating Instructions Manual page 27

VEGAWELL 52 • 4 ... 20 mA/HART
Fig. 17: Step 4
1 SW 46
2 SW 22
4. Pull the suspension cable out of the screwed socket, remove the
pressure screw, cone sleeve and seal cone from the cable
5. Remove the filter adapter from the capillary line
Fig. 18: Configuration of the cable seal
1 Connection cable (up to 6 pieces depending on the version)
2 Cable screening
3 Breather capillaries with filter element
4 Seal cone
5 Suspension cable
6 Cone bushing
7 Sealing screw
6. Cut the suspension cable to the requested length with side cut-
ters
7. Remove approx. 10 cm of the cable mantle, strip off approx. 1 cm
of the wire ends, insert the filter adapter
8 Maintenance and fault rectification
2
2
1
3
4
5
6
7
1
27