Safety And Compliance; Radio And Television Interference; Wireless Specifications - MakerBot Replicator Mini+ User Manual

SAFETY AND COMPLIANCE

MANUFACTURER
MakerBot Industries, LLC
One MetroTech Center, 21st Floor
Brooklyn, NY 11201
347.334.6800
‫1037232549 אוה תרושקתה דרשמ לש יטוחלא רושיא רפסמ‬
‫רחא ינכט יוניש לכ וב תושעל אלו רישכמה לש תירוקמה הנטנאה תא ףילחהל רוסא‬
This telecommunication equipment conforms to NTC technical requirement.
8.9.2 Connection and use of this communications equipment is permitted by the Nigerian
Communications Commission

RADIO AND TELEVISION INTERFERENCE

This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant
to Part 15 of the Federal Communications Commission (FCC) rules. These limits are designed to provide
reasonable protection against harmful interference in a residential installation. This equipment generates,
uses and can radiate radio frequency energy and, if not installed and used in accordance with the
instructions, may cause harmful interference to radio communications. However, there is no guarantee that
interference will not occur in a particular installation. If this equipment does cause harmful interference
to radio or television reception, which can be determined by turning the equipment off and on, the user is
encouraged to try to correct the interference by one or more of the following measures:
• Reorient or relocate the machine.
• Increase the separation between the equipment.
• Connect the equipment to an outlet on a different circuit.
Any changes or modifications made to this equipment voids your authority to operate this equipment
under FCC Rules.

WIRELESS SPECIFICATIONS

Antenna
WLAN RF
Frequency Protocol Antenna Type Specifications
Frequency Range
Taoglas, part # 2.5 dBi in the 2.4
2.4 GHz 2.412 – 2.472 GHz 802.11 b/g/n
FX831.07.0100C GHz band
WELCOME, LET'S GET STARTED 4