Safety And Compliance - MakerBot Replicator Mini Compact Reference Manual

Safety alert symbols
potential safety hazards that could harm you or others or cause product or property damage.
Warning:
The MakerBot Replicator Mini Compact 3D Printer generates high temperatures.
Always allow the MakerBot Replicator Smart Extruder to cool to 50° C before removing it or
reaching inside the MakerBot Replicator Mini.
Warning:
The MakerBot Replicator Mini includes moving parts that can cause injury.
Never reach inside the MakerBot Replicator Mini while it is in operation.
Warning:
There is a risk of shock. This product is not user serviceable.
Warning:
Do not leave the MakerBot Replicator Mini unattended during operation.
Caution:
Do not print using materials that have not been approved by MakerBot for
use with the MakerBot Replicator Mini. Refer to the Specifications section for more
information.
Caution:
The socket outlet must be located near the equipment and must be
easily accessible.
Caution:
In case of emergency disconnect the MakerBot Replicator Mini from the
wall socket.
Caution:
The MakerBot Replicator Mini melts plastic during printing. Plastic odors
are emitted during this operation. Make sure to set up the MakerBot Replicator Mini in
a well-ventilated area.
Caution:
Do not look directly at any operating LED component.
precede each safety message in this manual. These symbols indicate

SAFETY AND COMPLIANCE

REFERENCE
7