9.27. Disassembly of Tuner P.C.B.
• Follow (Step 1) to (Step 3) of Item 9.3.
Step 1 Remove 1 screw at the rear panel.
Step 2 Detach 10P FFC at the connector (CN6351) on Tuner
unit.
Step 3 Remove the Tuner Pack unit.
Step 4 Desolder pins at the connector (Z6351) on the solder
side of Tuner P.C.B..
Step 5 Desolder pins of Tuner Pack.
Step 6 Remove Tuner P.C.B..
9.28. Disassembly of BD Drive
• Follow (Step 1) to (Step 3) of Item 9.3.
• Follow (Step 1) to (Step 6) of Item 9.6.
• Follow (Step 1) to (Step 4) of Item 9.12.
9.28.1. Upper Base Ass'y
Step 1 Remove the 4 Screws , and push the Hook in.
Step 2 Lift up the Upper Base Ass'y, and pull it out to the direc-
tion of arrow.
60