Disassembly Of Rear Panel - Panasonic SA-BT300PX Service Manual

Step 3 Lift up Voltage Selector P.C.B..
Step 4 Remove Voltage SW Barrier in the direction of arrow.
Caution: During assembling, ensure that Voltage SW Bar-
rier is inserted into the Voltage Selector P.C.B..
Step 5 Desolder blue & white wire's pins on Voltage Selector
P.C.B..
Step 6 Remove Voltage Selector P.C.B..
9.5.

Disassembly of Rear Panel

• Follow (Step 1) to (Step 3) of Item 9.3.
Step 1 Remove 10 screws at the rear panel.
Step 2 Remove 1 screw at the rear panel.
Step 3 Detach 19P FFC at the connector (CN6301) on Wire-
less Adapter P.C.B..
40