Download  Print this page

Panasonic SA-BT235P Service Manual

Blu-ray disc home theater sound system.
Hide thumbs

Advertisement

Notes: 1) These model's BD Drive/Main P.C.B. Assembly are:-
- RFKNBT235PA.
2) Please refer to the original service manual for:
• Speaker system SB-BT235P-K, Order No: PSG1001017CE.
Caution:
Pairing of BD Drive and Main P.C.B. as "BD Drive & Main P.C.B. Assembly" have to be replaced together. If
either BD Drive or Main P.C.B. is changed, BD Drive unit has to carry out re-adjustment due to alignment
data for BD Drive Unit is stored in the Main P.C.B.
Blu-ray Disc Home Theater Sound System
Model No.
Volume 1
Product Color: (K)...Black Type
SA-BT235P
© Panasonic Corporation 2010. All rights reserved.
Unauthorized copying and distribution is a violation
of law.
PSG1003054CE
A6

Advertisement

Table of Contents

   Related Manuals for Panasonic SA-BT235P

   Summary of Contents for Panasonic SA-BT235P

  • Page 1 BD Drive or Main P.C.B. is changed, BD Drive unit has to carry out re-adjustment due to alignment data for BD Drive Unit is stored in the Main P.C.B. © Panasonic Corporation 2010. All rights reserved. Unauthorized copying and distribution is a violation...
  • Page 2: Table Of Contents

    TABLE OF CONTENTS PAGE PAGE 1 Safety Precautions -----------------------------------------------3 10.21. Replacement of Switching Regulator IC 1.1. GENERAL GUIDELINES --------------------------------3 (IC5701)---------------------------------------------------- 69 1.2. Before Repair and Adjustment--------------------------3 10.22. Replacement of Rectifier Diode (D5702) ---------- 70 1.3. Protection Circuitry-----------------------------------------4 10.23. Replacement of Regulator Diode (D5802) -------- 72 1.4.
  • Page 3: Safety Precautions

    1 Safety Precautions 1.1. GENERAL GUIDELINES 1. When servicing, observe the original lead dress. If a short circuit is found, replace all parts which have been overheated or damaged by the short circuit. 2. After servicing, see to it that all the protective devices such as insulation barriers, insulation papers shields are properly installed.
  • Page 4: Protection Circuitry

    1.2.1. Caution for fuse replacement 1.3. Protection Circuitry The protection circuitry may have operated if either of the following conditions are noticed: • No sound is heard when the power is turned on. • Sound stops during a performance. The function of this circuitry is to prevent circuitry damage if, for example, the positive and negative speaker connection wires are “shorted”, or if speaker systems with an impedance less than the indicated rated impedance of the amplifier are used.
  • Page 5: Safety Parts Information

    1.4. Safety Parts Information Safety Parts List: There are special components used in this equipment which are important for safety. These parts are marked by ( ) in the Schematic Diagrams & Replacement Parts List. It is essential that these critical parts should be replaced with manufacturer’s specified parts to prevent shock, fire or other hazards.
  • Page 6: Warning

    2 Warning 2.1. Prevention of Electrostatic Discharge (ESD) to Electrostatic Sensitive (ES) Devices Some semiconductor (solid state) devices can be damaged easily by static electricity. Such components commonly are called Elec- trostatically Sensitive (ES) Devices. Examples of typical ES devices are integrated circuits and some field-effect transistors and semiconductor “chip”...
  • Page 7: Precaution Of Laser Diode

    2.2. Precaution of Laser Diode Caution: This product utilizes a laser diode with the unit turned “on”, invisible laser radiation is emitted from the pickup lens. Wavelength: 790 nm (CDs), 655 nm (DVDs), 405 nm (BDs) Maximum output radiation power from pickup: 100 µW/VDE Laser radiation from the pickup unit is safety level, but be sure the followings: 1.
  • Page 8: Service Caution Based On Legal Restrictions

    2.3. Service caution based on Legal restrictions 2.3.1. General description about Lead Free Solder (PbF) The lead free solder has been used in the mounting process of all electrical components on the printed circuit boards used for this equipment in considering the globally environmental conservation. The normal solder is the alloy of tin (Sn) and lead (Pb).
  • Page 9: Handling Precautions For Bd Drive

    2.4. Handling Precautions for BD Drive The laser diode in the optical pickup unit may break down due to static electricity of clothes or human body. Special care must be taken avoid caution to electrostatic breakdown when servicing and handling the laser diode in the BD Drive. Figure 1 Grounding for electrostatic breakdown prevention 2.4.1.
  • Page 10: Service Navigation

    3 Service Navigation 3.1. Service Information This service manual contains technical information which will allow service personnel’s to understand and service this model. Please place orders using the parts list and not the drawing reference numbers. If the circuit is changed or modified, this information will be followed by supplement service manual to be filed with the original ser- vice manual.
  • Page 11: Caution For Replacing Parts

    Perform playback for one minute using the RAM disc. No abnormality should be seen in the picture, sound or operation. *Panasonic DVD-RAM disc should be used when recording and play- back. Perform playback for one minute using the BD-Video disc.
  • Page 12: Specifications

    4 Specifications HDMI (Deep Color,x.v.Color High Bit rate Audio ) This unit supports “HDAVI Control 5” function. LASER Specification Main unit SA-BT235P Class I LASER Product GENERAL Wave length: Power supply: AC 120 V,60 Hz 790 nm (CDs)/655 nm (DVDs)/405 nm (BDs)
  • Page 14: Location Of Controls And Components

    5 Location of Controls and Components 5.1. Remote Control Key Button Operations...
  • Page 15: Main Unit Key Button Operations

    5.2. Main Unit Key Button Operations...
  • Page 16: Using Bd-live Bonusview In Bd-video

    5.3. Using BD-LIVE BONUSVIEW in BD-Video...
  • Page 17: Using The Ipod/iphone

    5.4. Using the iPod/iPhone...
  • Page 18 5.4.1. iPod /iPhone Playback...
  • Page 19: Speaker Connections

    5.5. Speaker Connections Turn off all equipment before connection and read the appropriate operating instructions. Do not connect the AC power supply cord until all other connections are complete. Connect to the terminals of the same colour. 6 PURPLE Subwoofer 5 GREEN Center speaker 2 RED...
  • Page 20: Disc/cards Playability

    5.6. Disc/Cards Playability...
  • Page 21 5.6.1. Other Information...
  • Page 22: Sd Information

    5.7. SD Information...
  • Page 23: File Extension Type Support (mp3/jpeg/avchd/mpeg2 Files)

    5.8. File Extension Type Support (MP3/JPEG/AVCHD/MPEG2 files)
  • Page 24 5.8.1. File Folders Structures...
  • Page 25: Operating Instructions

    6 Operating Instructions 6.1. Removing of disc during abnomality 6.1.1. When the power can be turned off. Step 1 Turn off the power. Step 2 Press & hold [SKIP FWD] button on remote control and [OPEN/CLOSE] button on main unit for 5 seconds. 6.1.2.
  • Page 26: Self-diagnostic And Special Mode Setting

    7 Self-Diagnostic and Special Mode Setting 7.1. Special Mode Table 1 Self-Diagnostic Function provides information for error to service personnel by Self-Diagnosis Display when any error has occurred. U**, H** and F** are stored in my memory and held. • You can check latest error code by transmitting [0] [1] of Remote Control in Service Mode. Automatic Display on FL will be cancelled when the power is turned off or AC input is turned off during self-diagnosis display is Item Key operation...
  • Page 27: Special Mode Table

    7.2. Special Mode Table 2 Item FL display Key operation Mode name Description Front Key Demonstration lock/ Ejection of the disc is prohibited. *When lock the tray. When the power is on, press unlock The lock setting is effective until unlocking the [PLAY] and [OPEN/CLOSE] keys tray released...
  • Page 28: Error Code Table

    7.3. Error Code Table 7.3.1. Error Code Table (For BD) Error Code Diagnosis contents Description Monitor Display Automatic FL display Remote control code error Display appears when main unit and remote No display controller codes are not matched. is remote controller code of the main unit.
  • Page 29 7.3.2. Error Code Table 2 (For BD) Error Code Diagnosis contents Description Monitor Display Automatic FL display SELF Restoration operation Since the power cord fell out during a power No display SELF CHECK CHECK failure or operation, it is under restoration operation.
  • Page 30: Service Mode

    7.4. Service Mode To enter service mode: While the power is off, press & hold [VOL+] & [OPEN/CLOSE] button on main unit for 3 secs or more follow by [PLAY] button on main unit. 7.4.1. Service Mode Table 1 Item FL display Key operation Mode name...
  • Page 31: Service Mode Table

    7.4.2. Service Mode Table 2 Item FL display Key operation Mode name Description (Remote controller key) Laser Used Time Check laser used time (hours) of drive. Press [4] [1] in service mode. Indication ****** (******) is the used time display in hour.
  • Page 32 7.4.3. Service Mode Table 3 Item FL display Key operation Mode name Description (Remote controller key) BD/DVD drive last error BD/DVD drive error code display. 1. Error Number is displayed for 5 Press [4] [2] in service mode. seconds. **** 2.
  • Page 33 7.4.4. Service Mode Table 4 Item FL display Key operation Mode name Description (Remote controller key) In case that the maker cannot be 6. Disc maker ID is displayed for 5 identified, display is black out. seconds. 7. Factor of drive error (hexadeci- mal) occurring is left displayed.
  • Page 34 7.4.5. Service Mode Table 5 Item FL display Key operation Mode name Description (Remote controller key) CEC (H) output Check of the CEC terminal high output of Press [5] [5] in service mode. HDMI. CECHOK CECHNG CEC (L) output Check of the CEC terminal low output of Press [5] [6] in service mode.
  • Page 35: Troubleshooting Guide

    8 Troubleshooting Guide 8.1. Troubleshooting Guide for F61 and/or F76 Symptom Checking items Possible Fault(s) Remarks Set cannot ON Faulty AC Cord,Loose connection AC Cord Refer to P5701 soldier crack,dry joint,etc. AC Inlet P5701 SMPS F1 fuse open Fuse F1 P.C.B.
  • Page 36 8.1.1. SMPS P.C.B. Photocouple: Switching IC: IC5799 PC5702, D5799 FUSE: F1 Rectifier: D5802 Switching IC: IC5701 Transformer: T5701 Figure 1. SMPS P.C.B.
  • Page 37 8.1.2. Power P.C.B. (Side A of Power P.C.B.) Q2903 Q2902 IC2901 (Side B of Power P.C.B.) CN2916, CN2917, L2902 L2907 L2908 Fig 2. Power P.C.B.
  • Page 38 8.1.3. Main P.C.B. CN2004 IC2302, LB2301 Fig 3. Main P.C.B.
  • Page 39: Service Fixture & Tools

    9 Service Fixture & Tools 9.1. Service Tools and Equipment Prepare service tools before process service position. Service Tools Remarks SMPS P.C.B. (JW2*) - Main P.C.B. (CN2004) REXX1037 (10P Cable) Main P.C.B. (CN2006) - D-Amp P.C.B. (CN5402) RFKZBT230P (18P FFC)
  • Page 40: Disassembly And Assembly Instructions

    10 Disassembly and Assembly Instructions Caution Note: • This section describes the disassembly and/or assembly procedures for all major printed circuit boards & main compo- nents for the unit. (You may refer to the section of “Main components and P.C.B Locations” as described in the service manual) •...
  • Page 41: Disassembly Flow Chart

    10.1. Disassembly Flow Chart 10.3.Top Cabinet 10.4. AC Inlet P.C.B. 10.7. Front Panel Block 10.15.BD Drive 10.8. Panel P.C.B. 10.19. Power P.C.B. 10.5. Optical In P.C.B. 10.9. Power Button 10.6. Rear Panel 10.20. SMPS P.C.B. P.C.B. 10.21. Switching Regulator 10.10.Cradle Lid 10.16.
  • Page 42: Main Components And P.c.b. Locations

    10.2. Main Components and P.C.B. Locations...
  • Page 43: Disassembly Of Top Cabinet

    10.3. Disassembly of Top Cabinet Step 1 Remove 2 screws. Step 2 Remove 3 screws. Step 5 Press down the catches one by one. Caution: To avoid shocked by electricity & injured by high temperature. DO NOT TOUCH electrical components when insert hand under the Top Cabinet.
  • Page 44: Disassembly Of Ac Inlet P.c.b

    10.4. Disassembly of AC Inlet P.C.B. • Refer to “Disassembly of Top Cabinet”. Step 1 Remove 1 screw. Caution: During assembling, ensure that catches of Top Cabinet is insert into Front Panel properly. Step 2 Twist the Wire Holder. Step 3 Release Red(TL10) & Black(TL20) wires from the Wire Holder.
  • Page 45: Disassembly Of Optical In P.c.b

    10.5. Disassembly Optical 10.6. Disassembly of Rear Panel P.C.B. • Refer to “Disassembly of Optical In P.C.B.”. • Refer to “Disassembly of Top Cabinet”. Step 1 Lift up the Wire Clamper. Step 2 Detach the fan unit connector (CN5401) on D-Amp Step 1 Remove 2 screws.
  • Page 46: Disassembly Of Front Panel Block Assembly

    10.7. Disassembly of Front Panel Step 4 Release 3 tabs. Caution: Do not exert strong force when releasing the tabs. Block Assembly • Refer to “Disassembly of Top Cabinet”. Step 1 Detach 15P FFC at the connector (CN1101) on Main P.C.B..
  • Page 47: Dissassembly Of Panel P.c.b

    10.8. Dissassembly of Panel P.C.B. • Refer to “Disassembly of Front Panel Block Assembly”. Step 1 Remove 5 screws. • Assembly of Panel P.C.B Step 1 Solder the 4P cable to the connector (CN6001) on Panel P.C.B.. Step 2 Release 1 catch. Step 2 Place the Panel P.C.B.
  • Page 48: Dissassembly Of Power Button P.c.b

    Step 4 Dress 4P cable into the Front Panel’s ribs according to diagram shown. Step 2 Lift up the Power Button P.C.B.. Step 5 Fix 5 screws. Step 3 Desolder the 4P Cable (H6803) on Power Button P.C.B.. Step 4 Remove Power Button P.C.B.. 10.9.
  • Page 49 Step 2 Fix the Power Button P.C.B. onto the Front Panel. Caution: Ensure that it is properly located & seated prop- erly. Step 5 Dress 4P cable into Front Panel’s ribs & screw Boss according to diagram shown. Step 3 Fix 1 screw. Step 4 Dress 4P cable in between Front Panel’s ribs as shown.
  • Page 50: Replacement Of Cradle Lid

    10.10. Replacement of Cradle Lid • Refer to “Disassembly of Front Panel Block Assembly”. 10.10.1. Disassembly of Cradle Lid Step 1 Release the Cradle Lid Spring by using a flat head screw driver in the direction of arrow. Step 4 Rotate the Cradle Lid about 45° according to the dia- gram shown.
  • Page 51: Disassembly Of Ipod Cradle Assembly

    10.10.2. Assembly of Cradle Lid Caution: During assembling, replace Cradle Lid Damper if broken. Ensure it is properly pasted & fully pressed onto Cradle Lid. Step 1 Insert the Cradle Lid (Shaft A) into the Front Panel (Slot A & hole B). Step 4 Fix the Cradle Lid Spring onto Cradle Lid’s Shaft A.
  • Page 52 iPhone P.C.B.. Step 2 Remove 1 screw. Step 3 Open the Front Lid Unit. Step 4 Open the Cradle Lid. Step 7 Remove iPod Cradle Assembly. Step 5 Lift up the iPod Cradle Assembly on both sides. • Assembly of iPod Cradle Assembly Step 1 Fix the iPod Cradle Assembly to Front Panel.
  • Page 53: Disassembly Of Ipod/iphone P.c.b

    Step 2 Press the iPod Cradle Assembly downwards. Note: A “click” sound can be heard when the iPod Cradle Assembly is fixed onto the Front Panel properly. 10.12. Disassembly of iPod/iPhone P.C.B. • Refer to “Disassembly of iPod Cradle Assembly”. Step 1 Remove 2 screws.
  • Page 54: Replacement Of Dvd Lid Unit

    Caution: During assembling, ensure that iPod/iPhone P.C.B. is seated properly at the locators. 10.13. Replacement of DVD Lid Unit Step 3 Lift the DVD Lid Spring at Shaft A in the direction of arrow. • Refer to “Disassembly of Front Panel Block Assembly”. 10.13.1.
  • Page 55 Step 6 Move the DVD Lid Unit to remove from Front Panel. Step 3 Insert the DVD Lid Unit (Shaft B) into the Front Panel (Slot B) as arrow shown. 10.13.2. Assembly of DVD Lid Unit Step 1 Insert the DVD Lid Unit into the Front Panel as arrow shown.
  • Page 56: Disassembly Of Front Shield Plate Unit

    Caution: Ensure that the Shaft B of DVD Lid Unit is fully Step 4 Remove Front Shield Plate Unit. inserted into Slot B of Front Panel. 10.14. Disassembly of Front Shield Plate Unit • Refer to “Disassembly of Front Panel Block Assembly”. Caution: During assembling, ensure that Front Shield is properly inserted &...
  • Page 57: Disassembly Of Bd Drive

    Caution: During assembling, ensure that screwing sequence is strictly followed to illustration shown. 10.15. Disassembly of BD Drive • Refer to “Disassembly of Top Cabinet Assembly”. • Refer to “Disassembly of Front Panel Block Assembly”. • Refer to “Disassembly of Front Shield Plate Unit”. Caution: Pairing of BD Drive and Main P.C.B.
  • Page 58 10.15.1. Replacement of Upper Base Ass’y • Refer to “Disassembly of BD Drive”. Step 1 Remove the 4 screws, and push the Hook in. Step 2 Pull the Tray to the direction of arrow until it can be. Step 2 Lift up the Upper Base Ass’y, and pull it out to the direc- tion of arrow.
  • Page 59 10.15.4. Replacement Slide Cam • Refer to “Disassembly of BD Drive”. • Refer to “Disassembly of Upper Base Assembly”. • Refer to “Disassembly of Tray”. • Refer to “Disassembly of Pulley Gear & Belt”. Step 1 Remove the Sheet. Step 2 Disconnect the 3 FFCs. Step 3 Remove the 2 Screws and the Angle.
  • Page 60 10.15.5. Replacement of Mid Base, Driver Gear and Loading Motor • Refer to “Disassembly of BD Drive”. • Refer to “Disassembly of Upper Base Assembly”. • Refer to “Disassembly of Tray”. • Refer to “Disassembly of Pulley Gear & Belt”. •...
  • Page 61 10.15.6. Applying of Grease...
  • Page 62 10.15.7. Cleansing the Lens of Optical Pick-Up Unit • Refer to “Disassembly of BD Drive”. • Refer to “Disassembly of Upper Base Assembly”.
  • Page 63: Disassembly Of Main P.c.b

    10.16. Disassembly of Main P.C.B. Caution: During assembling, ensure that 10P cable is prop- erly bend down onto Main P.C.B. Shield Plate according to • Refer to “Disassembly of Top Cabinet Assembly”. diagram shown. • Refer to “Disassembly of Front Panel Block Assembly”. •...
  • Page 64: Disassembly Of D-amp P.c.b

    Caution: During assembling, ensure that Main P.C.B. is seated properly at the locators. Step 12 Lift up to remove Main P.C.B.. 10.17. Disassembly of D-Amp P.C.B. • Refer to “Disassembly of Top Cabinet Assembly”. • Refer to “Disassembly of AC Inlet Assembly”. Step 1 Lift Up 2 Wire Clampers.
  • Page 65 Step 8 Remove D-Amp P.C.B. according to direction of arrow shown. Step 5 Remove 2 screws on D-Amp P.C.B.. Caution: During assembling, ensure that D-Amp P.C.B. is seated properly at the locators. Step 6 Remove 4 screws. Step 7 Release the tab of the side of the Rear Panel in the direction of arrow.
  • Page 66: Replacement Of Digital Amplifier Ic (ic5100/ Ic5200)

    10.18. Replacement of Digital Ampli- fier IC (IC5100/IC5200) • Refer to “Disassembly of D-Amp P.C.B.”. 10.18.1. Disassembly of Digital Amplifier IC (IC5100/IC5200) Step 1 Place the D-Amp P.C.B. on an insulated material. Step 2 Remove 3 screws. 10.18.2. Assembly of Digital Amplifier IC (IC5100/IC5200) Step 1 Mount the Digital Amplifier IC (IC5100) onto the D-Amp P.C.B..
  • Page 67: Disassembly Of Power P.c.b

    Caution: During assembling, ensure that heatsink spacer Caution: During assembling, ensure that Power P.C.B. is is seated properly onto Amp Heatsink. properly inserted & fully connected to SMPS P.C.B.. Caution: Ensure that D-Amp P.C.B. is properly located and fixed on to Amp Heatsink before screwing. Step 5 Fix 3 screws.
  • Page 68 Caution: Do not exert strong force when releasing the tabs. Caution: During assembling, ensure that 10P cable is bend down properly as diagram shown. Step 3 Detach the Front Panel Block Assembly slightly forward. Step 7 Remove 5 screws. Step 4 Lift up the Wire Clampers. Step 5 Detach 6P Cable at the connector (CN5400) on D-Amp P.C.B..
  • Page 69: Replacement Of Switching Regulator Ic (ic5701)

    Caution: During releasing P.C.B. Spacer, as it may lead to electric shock or injuries due to high temperature avoid touching surrounding electrical parts. 10.21. Replacement of Switching Reg- ulator IC (IC5701) Step 9 Lift up SMPS P.C.B.. • Refer to “Disassembly of SMPS P.C.B.”. 10.21.1.
  • Page 70: Replacement Of Rectifier Diode (d5702)

    Step 2 Remove 1 screw from the Switching Regulator IC Caution: Ensure pins of the Switching Regulator IC (IC5701) are properly seated and soldered on SMPS P.C.B.. (IC5701). Step 3 Remove the Switching Regulator IC (IC5701). Caution: Avoid touching the Heatsink Unit B due to its high temperature after prolonged use.
  • Page 71 10.22.2. Assembly Rectifier Diode (D5702) Step 1 Apply grease to the Heatsink Unit B. Step 2 Fix and screw the Rectifier Diode (D5702) to the Heat- sink Unit B. Caution: Ensure the Rectifier Diode (D5702) is tightly screwed to the Heatsink Unit B. Step 3 Fix the Heatsink Unit B with Rectifier Diode (D5702) onto SMPS P.C.B..
  • Page 72: Replacement Of Regulator Diode (d5802)

    Caution: Ensure pins of the Rectifier Diode (D5702) are properly seated before soldered onto SMPS P.C.B.. Step 2 Remove 1 screw from the Regulator Diode (D5802). Step 3 Remove the Regulator Diode (D5802) from the SMPS P.C.B.. Caution: Avoid touching the Heatsink Unit A due to its high temperature after prolonged use.
  • Page 73: Replacement Of Regulator Diode (d5803)

    Caution: Ensure the Regulator Diode (D5802) is tightly screwed to the Heatsink Unit A. Step 4 Solder pins of the Regulator Diode (D5802) on the sol- der side of SMPS P.C.B.. Caution: Ensure pins of the Regulator Diode (D5802) are properly seated before soldered onto SMPS P.C.B..
  • Page 74: Disassembly Of Fan

    Caution: Ensure the Regulator Diode (D5803) is tightly screwed to the Heatsink Unit A. Step 4 Solder pins of the Regulator Diode (D5803) on the sol- der side of SMPS P.C.B.. Caution: Ensure pins of the Regulator Diode (D5803) are Step 3 Remove 2 screws.
  • Page 75 Caution: During assembling, ensure Fan Unit is properly Caution: During assembling, ensure that 3P Wire is posi- located & fully catched onto Rear Panel. tioned as diagram shown. Step 5 Remove 2 screws. Step 6 Lift up to remove Fan.
  • Page 76: Service Position

    11 Service Position Note: For description of the disassembly procedures, see the Section 10. 11.1. Checking & Repairing Side B of Main P.C.B. Caution: Pairing of BD Drive and Main P.C.B. as “BD Drive & Main P.C.B. Assembly” have to be replaced together. If either BD Drive or Main P.C.B.
  • Page 77 Step 5 Lift up Panel P.C.B.. Step 8 Remove Front Shield plate Unit. Step 9 Remove Main P.C.B. Shield Plate. Step 10 Connect 45P FFC at the connector (P55001) on Main P.C.B.. Step 11 Connect 18P FFC at the connector (P55002) on Main P.C.B..
  • Page 78: Checking & Repairing D-amp P.c.b

    Caution: Insulated material is required to insulate Main P.C.B. from other parts. 11.3. Checking & Repairing D-Amp P.C.B. Step 15 Position Panel P.C.B. & Power Button P.C.B. as dia- gram shown. 11.3.1. Checking & Repairing of Side B of Step 16 Connect 22P FFC at the connector (CN2002) on Main P.C.B..
  • Page 79 Step 4 Twist the Wire Clamper to release 6P Cable. Step 5 Remove 2 screws. Step 9 Twist the Wire Holder. Step 10 Release Red(TL10) & Black(TL20) wires from the Wire Holder. Step 11 Remove AC Inlet P.C.B.. Step 6 Remove 6 screws. Step 7 Remove Fan Unit according to arrow shown.
  • Page 80: Checking & Repairing Smps P.c.b

    Step 4 Slightly move Front Panel Block Assembly forward. 11.4. Checking & Repairing SMPS P.C.B. Step 1 Remove Top Cabinet. Step 2 Release the 3 tabs. Step 5 Remove 1 screw. Step 3 Release the 2 tabs at each side of the Front Panel Block Step 6 Twist the Wire Holder.
  • Page 81 Caution: During releasing of the P.C.B. Spacer, avoid touching the electrical components. Step 11 Release P.C.B. Spacer by using long nose plier. Step 9 Twist the Wire Clampers to release 6P cable (SMPS P.C.B. to D-Amp P.C.B.) & 10P cable (SMPS P.C.B. to Main P.C.B.).
  • Page 82: Checking & Repairing Panel P.c.b

    Step 6 Remove 1 screws. 11.5. Checking & Repairing Panel P.C.B. Step 1 Remove Top Cabinet. Step 2 Remove Front Panel Block Assembly. Step 3 Remove 5 screws. Step 7 Lift up Power Button P.C.B.. Step 4 Release 1 catch. Step 8 Connect 22P FFC to the connector (CN2002) on Main P.C.B..
  • Page 84: Voltage & Waveform Chart

    REF NO. MODE CD PLAY STANDBY REF NO. IC2201 MODE CD PLAY -6.8 STANDBY -6.8 IC2202 REF NO. MODE CD PLAY -6.8 STANDBY -6.8 REF NO. IC2300 MODE CD PLAY STANDBY IC2300 REF NO. MODE CD PLAY STANDBY SA-BT235P MAIN P.C.B.
  • Page 85: Main P.c.b. (2/3)

    IC2400 REF NO. MODE CD PLAY STANDBY IC2800 REF NO. MODE CD PLAY -6.8 STANDBY -6.8 IC2952 REF NO. MODE CD PLAY STANDBY IC7002 REF NO. MODE CD PLAY STANDBY REF NO. IC7003 MODE CD PLAY STANDBY SA-BT235P MAIN P.C.B.
  • Page 86: Main P.c.b. (3/3)

    REF NO. MODE CD PLAY -3.0 -1.6 -1.6 11.4 11.4 10.7 STANDBY -3.0 -1.6 -1.6 11.4 11.4 10.7 QR1102 Q56004 Q56005 QR7001 QR7014 REF NO. MODE CD PLAY STANDBY QR7019 QR7071 QR7081 REF NO. MODE CD PLAY STANDBY SA-BT235P MAIN P.C.B.
  • Page 87: Panel P.c.b

    -21.2 -23.4 -21.2 -14.8 -14.8 -21.2 -23.4 -14.8 -12.6 -23.9 -17.1 -23.6 -21.4 -21.4 -21.4 -21.4 -21.4 -21.4 -21.4 -21.4 IC6001 REF NO. MODE CD PLAY -21.4 -21.4 STANDBY -21.4 -21.4 Q6100 Q6800 REF NO. MODE CD PLAY STANDBY SA-BT235P PANEL P.C.B.
  • Page 88: D-amp P.c.b. (1/2)

    CD PLAY STANDBY REF NO. IC5400 MODE CD PLAY 13.1 13.1 11.6 STANDBY 13.1 13.1 11.6 IC5401 REF NO. MODE CD PLAY STANDBY IC5402 REF NO. MODE CD PLAY STANDBY IC5404 REF NO. MODE CD PLAY STANDBY SA-BT235P D-AMP P.C.B.
  • Page 89: D-amp P.c.b. (2/2)

    STANDBY 42.4 Q5414 QR5400 QR5401 REF NO. MODE CD PLAY 12.0 STANDBY 12.0 SA-BT235P D-AMP P.C.B. 12.7. Power P.C.B. REF NO. IC2901 MODE CD PLAY 16.4 11.2 14.9 14.3 16.5 16.5 15.8 STANDBY 16.4 11.2 14.9 14.3 16.5 16.5 15.8...
  • Page 90: Smps P.c.b

    -14.0 -15.0 -14.6 -13.1 -15.1 -15.0 -15.0 IC5801 REF NO. MODE CD PLAY 18.3 STANDBY 18.3 IC5899 REF NO. MODE CD PLAY STANDBY Q5720 Q5863 Q5898 Q5899 QR5862 REF NO. MODE CD PLAY -10.3 -9.9 -10.2 STANDBY -10.3 -9.9 -10.2 SA-BT235P SMPS P.C.B.
  • Page 91: Waveform Table

    12.9. Waveform Table 5.6Vp-p(2usec/div) 4Vp-p(5usec/div) 4.4Vp-p(500nsec/div) 1Vp-p(10usec/div) 3Vp-p(10usec/div) 3.6Vp-p(50nsec/div) 2Vp-p(50nsec/div) 0.24Vp-p(1msec/div) 5.2Vp-p(1usec/div) 80Vp-p(1usec/div) 2.2Vp-p(1msec/div) 0.24Vp-p(1msec/div) 5.6Vp-p(1usec/div) 6.8Vp-p(1usec/div) 76Vp-p(1usec/div) 3.6Vp-p(500nsec/div) 6Vp-p(1usec/div) 1.5Vp-p(2usec/div) 3.2Vp-p(2usec/div) 1Vp-p(5usec/div)
  • Page 92 5.2Vp-p(2usec/div)
  • Page 93: Illustration Of Ics, Transistor And Diode

    13 Illustration of ICs, Transistor and Diode C0ABBB000189 (8p) C0HBB0000057 (44p) MFI341S2164 (20p) RFKWMBT230P VUEALLPT041 (20p) C0ABBB000179 (8p) (100p) C0DBZYY00018 (8p) C0FBAK000026 (16p) No.1 C0JBAR000540 (16p) C0DBAYY00729 (20p) C1AB00002461 (30p) No.1 No.1 No.1 No.1 C1AB00003260 (36p) C2HBCA000001 (40p) C0ABZA000080 C3EBFC000042 (8p) MIP2F20MSSCF C0JBAR000434 C0JBAB000837...
  • Page 95: Block Diagram

    UART TX 35 SWITCH CN1001 CN1002 CN1101 iPod VOUT TUN SDIO QR1101 TUN SDIO TUN SDIO MAIN(VIDEO) PCONT SWITCH Q1103 UART RX CN1101 CN1002 CN1001 SWITCH UART RX 36 QR1102 PCONT SWITCH iPod/iPhone P.C.B. PCONT PCONT 50 SA-BT235P MAIN(SYSTEM CONTROL) BLOCK DIAGRAM...
  • Page 96: Main(audio)

    MAIN(SYSTEM CONTROL) Q2805 OPTICAL 1 CN4002 CN2011 OPT IN1 OPT IN 3 SEL B SEL B INVERTER 9 B (MSB) DIGITAL AUDIO IN JK3101 OPTICAL 2 OPT IN2 CN4002 CN2011 OPT IN 3 OPTICAL IN P.C.B. SA-BT235P MAIN(AUDIO) (1/2) BLOCK DIAGRAM...
  • Page 97 6 SELECT MAIN(SYSTEM CONTROL) TO MAIN(AUDIO) SECTION (1/2) DSP RESET RESETX 12 DSP RESET DSP MUTE MUTEX 13 DSP MUTE FROM/TO DSP CLK DSP CLK MAIN(SYSTEM CONTROL) SCL 14 DSP DA SDA 15 DSP DA SA-BT235P MAIN(AUDIO) (2/2) BLOCK DIAGRAM...
  • Page 98: Digital Audio

    Q5408, Q5409, Q5414 Q5400,Q5401 Q5402,Q5403 Q5404,Q5405 FAN DC OUT CN5401 FAN CONTROL CN2006 CN5402 FAN SIGNAL CIRCUIT CN5401 FAN LOCK FROM/TO MAIN(SYSTEM CONTROL) QR5401 DC DETECT CN2006 CN5402 ECO CIRCUIT FROM POWER SUPPLY DCDET (MAIN SECTION) SA-BT235P DIGITAL AUDIO BLOCK DIAGRAM...
  • Page 99: Power Supply(main Section)

    D5405 CN5402 CN2006 JW1* CN5400 +51V +55V DIGITAL AUDIO PVDD D5407 DCDET DIGITAL AUDIO PC5720 FEED BACK FROM FEED BACK POWER CONT JW2* CN2004 CIRCUIT MAIN(SYSTEM CONTROL) IC5801 C0DABFC00002 SHUNT REGULATOR Q5863 COLD SA-BT235P POWER SUPPLY(MAIN SECTION) (1/2) BLOCK DIAGRAM...
  • Page 100 D7016 Q1104 IC1001 C0DBZHE00026 CN1101 CN1002 CN1001 HIGH SIDE iPod CTRL SW SWITCH SWITCH D7017 D7036 CN1101 CN1002 CN1001 1 IN OUT 5 BATTPCONT 3 EN OC 4 FROM/TO MAIN(SYSTEM CONTROL) iPod OC SA-BT235P POWER SUPPLY(MAIN SECTION) (2/2) BLOCK DIAGRAM...
  • Page 101: Wiring Diagram

    (SIDE B) FRONT (SIDE B) DOCK FOR iPod/iPhone SPEAKERS DIGITAL AUDIO IN CENTER POWER BUTTON P.C.B. CN1001 OPTICAL 1 OPTICAL 2 (SOLDER SIDE) SUBWOOFER H6803 CN1002 CN4002 JK3100 JK3101 NOTE: " * " REF IS FOR INDICATION ONLY. SA-BT235P WIRING CONNECTION...
  • Page 103: Schematic Diagram Notes

    16 Schematic Diagram Notes • This schematic diagram may be modified at any time with the development of new technology. Notes: S6002: Stop switch ( S6003: Play switch ( S6005: Vol (+). S6006: Vol (-). S6007: Selector switch. S6801: Power switch ( S6807: Open/Close switch ( •...
  • Page 105: Schematic Diagram

    FE: MAIN(BP1 FE): SCHEMATIC DIAGRAM - 11 ~ 14 PE: MAIN(BP1 PERI): SCHEMATIC DIAGRAM - 15 ~ 16 TO MAIN(MICON) VO: MAIN(VIDEO OUT): SCHEMATIC DIAGRAM - 17 SECTION (4/6) MA: MAIN(MICON): SCHEMATIC DIAGRAM - 18 ~ 23 SA-BT235P MAIN(MICON) CIRCUIT TN: MAIN(TUNER): SCHEMATIC DIAGRAM - 24...
  • Page 106 FE: MAIN(BP1 FE): SCHEMATIC DIAGRAM - 11 ~ 14 GND_3 PE: MAIN(BP1 PERI): SCHEMATIC DIAGRAM - 15 ~ 16 TO MAIN(MICON) VO: MAIN(VIDEO OUT): SCHEMATIC DIAGRAM - 17 SECTION (5/6) MA: MAIN(MICON): SCHEMATIC DIAGRAM - 18 ~ 23 SA-BT235P MAIN(MICON) CIRCUIT TN: MAIN(TUNER): SCHEMATIC DIAGRAM - 24...
  • Page 107 DC DETECT APD_R B0BC7R5A0266 C2202 R2204 PW_A+7V 100K PW_DC5V_DR TO MAIN(MICON) PW_A-7V QR7019 SECTION (2/6) LB7012 B1GBCFJJ0051 J0JHC0000107 D7020 B0ACCK000005 DC DETECT D7021 B0ACCK000005 C7019 C7058 6.3V1000 D7038 B0BC013A0269 LB7013 J0JHC0000107 PW_DC12V_DR C7020 16V470 TO MAIN(MICON) SECTION (6/6) SA-BT235P MAIN(MICON) CIRCUIT...
  • Page 108 SWITCH 100K LB1108 R1101 330K R1103 220K iPod/iPhone iPod_ACC LB1101 J0JYC0000070 CIRCUIT (CN1002) iPod_5V DOCK_L LB1109 IN SCHEMATIC DOCK_L J0JCC0000316 DIAGRAM - 33 DOCK_AGND DOCK_R DOCK_R iPod_DET LB1103 iPod_DET VGND VIDEO LB1102 VGND C1134 C1131 1000P 1000P SA-BT235P MAIN(MICON) CIRCUIT...
  • Page 109 FE: MAIN(BP1 FE): SCHEMATIC DIAGRAM - 11 ~ 14 PE: MAIN(BP1 PERI): SCHEMATIC DIAGRAM - 15 ~ 16 VO: MAIN(VIDEO OUT): SCHEMATIC DIAGRAM - 17 MA: MAIN(MICON): SCHEMATIC DIAGRAM - 18 ~ 23 TN: MAIN(TUNER): SCHEMATIC DIAGRAM - 24 SA-BT235P MAIN(MICON) CIRCUIT...
  • Page 110 FE: MAIN(BP1 FE): SCHEMATIC DIAGRAM - 11 ~ 14 PE: MAIN(BP1 PERI): SCHEMATIC DIAGRAM - 15 ~ 16 VO: MAIN(VIDEO OUT): SCHEMATIC DIAGRAM - 17 MA: MAIN(MICON): SCHEMATIC DIAGRAM - 18 ~ 23 TN: MAIN(TUNER): SCHEMATIC DIAGRAM - 24 SA-BT235P MAIN(MICON) CIRCUIT...
  • Page 111 FE: MAIN(BP1 FE): SCHEMATIC DIAGRAM - 11 ~ 14 PE: MAIN(BP1 PERI): SCHEMATIC DIAGRAM - 15 ~ 16 VO: MAIN(VIDEO OUT): SCHEMATIC DIAGRAM - 17 MA: MAIN(MICON): SCHEMATIC DIAGRAM - 18 ~ 23 TN: MAIN(TUNER): SCHEMATIC DIAGRAM - 24 SA-BT235P MAIN(TUNER) CIRCUIT...
  • Page 112: Panel Circuit

    VOL - DGND_ASS R6801 R6021 R6022 R6023 R6024 1.2K 1.5K 2.2K 3.3K 4.7K S6807 S6007 R6025 OPEN/CLOSE SELECTOR CN6001 L6007 J0JBC0000014 DGND POWER BUTTON KEY1 L6006 J0JBC0000014 KEY1_BTN CIRCUIT (H6803) L6005 IN SCHEMATIC LED_VREF LED_VREF DIAGRAM - 32 SA-BT235P PANEL CIRCUIT...
  • Page 113: D-amp Circuit

    DAP_SCL_2 FRONT L - RESERVED DAP_LRCLK DAP_SCLK FRONT L + TO SPEAKERS LRCLK SCLK FRONT R - FRONT R + CENTER - CENTER + SUBWOOFER - SUBWOOFER + IC5405 C0JBAA000501 AND GATE VALID1 TO D-AMP SECTION (3/4) SA-BT235P D-AMP CIRCUIT...
  • Page 114 R5445 D5620 1000P SPK_GND 35V470 B0HCSP000001 D5512 B0ACCK000005 D5619 L5106 B0HCSP000001 G0B9R5K00005 R5136 100K C5156 C5143 R5125 R5452 1000P 35V330 5.6K R5135 100K 5.6K C5142 C5157 C5144 1000P 35V470 D5618 D5510 B0HCSP000001 B0ACCK000005 TO D-AMP SECTION (4/4) SA-BT235P D-AMP CIRCUIT...
  • Page 115 B0BC7R5A0268 C5437 C5418 R5438 16V22 6.3V100 220K R5428 D5404 R5424 R5435 Q5405 B0ACCK000005 Q5412 B1ABCF000011 B1ABCF000011 SWITCH R5437 R5427 D5403 C5423 R5423 C5417 D5402 B0ACCK000005 16V10 B0BC012A0269 4.7K DC DETECT 100K C5424 5600P TO D-AMP SECTION (4/4) SA-BT235P D-AMP CIRCUIT...
  • Page 116 1000P C5204 C5231 0.01 C5237 C5228 R5215 R5220 1000P 0.47 100K R5214 D5611 B0HCSP000001 C5230 1000P C5238 C5232 1000P 0.01 PVDD D5610 B0HCSP000001 D5628 D5627 R5474 B0BC012A0269 B0ACCK000005 C5450 R5473 R5472 16V22 6.8K TO D-AMP SECTION (3/4) SA-BT235P D-AMP CIRCUIT...
  • Page 117: Smps Circuit

    PCONT PCONT DC_18V R5805 DC18V 6.8K DC12V MAIN(MICON) PGND Q5863 CIRCUIT (CN2004) B1ABGC000001 R5819 IN SCHEMATIC R5728 DC5V SWITCH R5817 DIAGRAM - 20 DCDET 2.2K DCDET SYS5V SYS6V SYNC R5861 C5869 C5828 R5818 SYNC 100K 0.01 6.3V2200 SA-BT235P SMPS CIRCUIT...
  • Page 118 TO SMPS C5720 C5725 OLP/SS 100P R5733 SECTION (1/2) D5705 B0BC020A0267 D5710 ZJ5702 B0EAMM000057 C5722 C5724 C5730 C5700 1000P R5732 D5713 F1BAF1020020 1000P B0BC030A0264 1000P HEATSINK* C5721 C5726 C5747 D5708 220P 50V10 3300P B0ACCK000005 R5726 R5727 0.15 0.15 SA-BT235P SMPS CIRCUIT...
  • Page 119: Power, Power Button & Ac Inlet Circuit

    L6806 DGND PANEL CIRCUIT L6804 SMPS CIRCUIT KEY1_BTN AC IN (CN6001) IN SCHEMATIC L6805 120V 60Hz IN SCHEMATIC L6803 DIAGRAM - 31 LED VREF DIAGRAM - 25 TL20* D6800 (BLK) B3ABA0000187 SA-BT235P POWER / POWER BUTTON / AC INLET CIRCUIT...
  • Page 120: Ipod/iphone & Optical In Circuit

    R1011 IN - L DOCK_R OUT J0JFC0000006 L1030 IN - R iPod DET R1001 R1003 R1004 OUT_L L1032 VGND 100K 100K J0JBC0000015 R1002 OUT_R VIDEO AUDIO_RETURN VGND L1009 iPod_DET L1031 R1012 J0JFC0000006 L1008 J0JFC0000006 SA-BT235P iPod/iPhone / OPTICAL IN CIRCUIT...
  • Page 121: Printed Circuit Board

    R2821 R2822 R54909 R2963 C54903 R2823 R2824 C54910 C2811 Q2800 LB2801 R2806 C2817 C54901 C54900 R54901 R2959 IC2800 R54902 R2810 LB2802 Q2805 C2818 LB2806 C2807 C2813 LB2807 LB2804 C2812 LB2808 C2814 C2816 0660AA-3 0660AA-3 C2815 (SIDE A) SA-BT235P MAIN P.C.B.
  • Page 122 (TO BD DRIVE) R55164 IC2202 2.5A R2208 R2962 IC2201 TL55005 IC55002 R2209 TL55007 C2960 R2952 C2206 R2951 JK2951 R2213 LB55001 R2207 D2201 C2204 C2959 R2961 C54906 C2202 C2072 FM ANT R2204 R2202 L2072 0660AA-3 0660AA-3 (SIDE B) SA-BT235P MAIN P.C.B.
  • Page 123: Panel, Power, Power Button & Ac Inlet P.c.b

    AC INLET P.C.B. (REPX0803K) 0653AD 0653AD P5701 L6806 D6800 H6803 S6801 (POWER) AC IN 120V 60Hz TL10* TL20* 0662AC-1 0662AC-1 NOTE: " * " REF IS FOR INDICATION ONLY. SA-BT235P PANEL / POWER / POWER BUTTON / AC INLET P.C.B.
  • Page 124: D-amp P.c.b

    D5612 D5621 L5106 5-FR+ D5619 4-C- CENTER L5203 3-C+ R5220 2-SW- R5223 SUBWOOFER D5610 C5237 D5613 R5219 D5616 1-SW+ L5204 0661AA 0661AA 0661AA 0661AA (SIDE A) (SIDE B) NOTE: " * " REF IS FOR INDICATION ONLY. SA-BT235P D-AMP P.C.B.
  • Page 125: Smps P.c.b

    CN5802 D5702 C5840 C5726 C5824 PC5720 Q5863 JW2* C5869 R5804 R5861 R5806 C5818 R5730 IC5801 C5800 D5707 ZJ5702 R5819 R5805 D5712 R5817 R5720 R5818 HEATSINK ZJ5703 0662AA-1 0662AA-1 NOTE: " * " REF IS FOR INDICATION ONLY. SA-BT235P SMPS P.C.B.
  • Page 126: Ipod/iphone & Optical In P.c.b

    0634A-1 0634A-1 0634A-1 0634A-1 L1025 L1024 (SIDE A) (SIDE B) OPTICAL IN P.C.B. (REPX0793BB) DIGITAL AUDIO IN OPTICAL 1 OPTICAL 2 C3104 C3103 CN4002 JK3100 JK3101 0660AB-3 0660AB-3 0660AB-3 0660AB-3 (SIDE A) (SIDE B) SA-BT235P iPod/iPhone / OPTICAL IN P.C.B.
  • Page 127: Terminal Function Of Ics

    19 Terminal Function of ICs 19.1. IC6001(C0HBB0000057): IC FL Driver Terminal Name Function LED1 O No Connection LED2 No Connection LED3 No Connection LED4 No Connection Oscillator Input DOUT No Connection Data Input Clock Input Serial Interface Strobe 10 K1 No Connection 11 K2 No Connection...
  • Page 129: Exploded View And Replacement Parts List

    CN5802 *TL11 *TL21 ZJ5703 CN5803 ZJ5702 18-1 28-3 18-1 28-1 28-1 CN1002 28-1 12-1 12-1 (iPod / iPhone P.C.B.) 28-2 28-1 CN1001 12-1 SA-BT235P-K NOTE: " * " PART IS NOT SUPPLIED / REF IS FOR INDICATION ONLY. CABINET DRAWINGS...
  • Page 130 20.1.2. Mechanism BD Drive...
  • Page 131 20.1.3. Packaging ACCESSORIES BOX REMOTE CONTROL AC CORD A1-1 R/C BATTERY COVER FM INDOOR ANTENNA VIDEO CABLE SCREW SA-BT235P SB-BT235P F R O N T POLYFOAM (LEFT) POLYFOAM (RIGHT) SC-BT235P-K PACKAGING DRAWINGS...
  • Page 133 20.1.4. Mechanical Replacement Part List Safety Ref. Part No. Part Name & Qty Remarks Description Safety Ref. Part No. Part Name & Qty Remarks RSC0854 RADIATOR SHEET B Description RSC0927-1 MAIN PCB SHIELD CABINET RXQX1026 CABINET CHASSIS INSULATOR SHEET L6FAYYYH0079 FAN UNIT RXK0625-1 CHASSIS UNIT...
  • Page 134 Safety Ref. Part No. Part Name & Qty Remarks Description REEX1114 (iPod- MAIN) REZ2014 (OPTI- CAL IN-MAIN)) RXQ1863-1 FRONT SHIELD UNIT RSQ0111 TOP GASKET RSQ0112 GASKET RMA2265 GASKET HOLDER RMN0941 AC INLET HOLDER VQL1V70-J LASER CAUTION LABEL VMA0V86 YOKE VMD5751 UPPER BASE VMD5752 CLAMPER...
  • Page 135: Electrical Replacement Part List

    20.2. Electrical Replacement Part List Safety Ref. Part No. Part Name & Qty Remarks Description Safety Ref. Part No. Part Name & Qty Remarks IC5404 C0JBAB000837 Description IC5405 C0JBAA000501 PRINTED CIRCUIT IC5701 C5HACYY00004 BOARDS IC5799 MIP2F20MSSCF PCB1 RFKNBT235PA BD DRIVE / MAIN IC5801 C0DABFC00002 P.C.B.
  • Page 136 Safety Ref. Part No. Part Name & Qty Remarks Safety Ref. Part No. Part Name & Qty Remarks Description Description Q6100 B1BABK000001 TRANSISTOR D5803 B0HFRJ000012 DIODE Q6800 B1ABEB000002 TRANSISTOR D5805 B0EAMM000057 DIODE Q7004 B1ADNB000003 TRANSISTOR D5810 B0ACCK000005 DIODE Q7005 B1ADCE000012 TRANSISTOR D5811 B0BC5R1A0266...
  • Page 137 Safety Ref. Part No. Part Name & Qty Remarks Safety Ref. Part No. Part Name & Qty Remarks Description Description L1011 J0JFC0000006 INDUCTOR LB57000 J0JGC0000020 INDUCTOR L1032 J0JBC0000015 INDUCTOR L2072 G1C100M00049 INDUCTOR TRANSFORMER L2902 G0A200D00002 CHOKE COIL T5701 ETS42BM1GGAC TRANSFORMER L2903 G0A330ZA0045 CHOKE COIL...
  • Page 138 Safety Ref. Part No. Part Name & Qty Remarks Safety Ref. Part No. Part Name & Qty Remarks Description Description L1027 D0GBR00JA008 1/16W R1109 D0GA472JA023 4.7K 1/16W L1028 D0GBR00JA008 1/16W R1110 D0GA104JA023 100K 1/16W L1029 D0GBR00JA008 1/16W R1111 ERJ2GEJ750X 1/16W L1030 D0GBR00JA008 1/16W...
  • Page 139 Safety Ref. Part No. Part Name & Qty Remarks Safety Ref. Part No. Part Name & Qty Remarks Description Description R2210 D0GA101JA023 1/16W R2817 D0GA102JA023 1/16W R2211 D0GA103JA023 1/16W R2821 D0GA473JA023 1/16W R2212 D0GA103JA023 1/16W R2822 D0GA473JA023 1/16W R2213 D0GA102JA023 1/16W R2823 D0GA102JA023...
  • Page 140 Safety Ref. Part No. Part Name & Qty Remarks Safety Ref. Part No. Part Name & Qty Remarks Description Description R5217 D0GB104JA008 100K 1/16W R5726 ERJ1TRSJR15U 0.15 1/2W R5219 D0GB104JA008 100K 1/16W R5727 ERJ1TRSJR15U 0.15 1/2W R5220 D0GB104JA008 100K 1/16W R5728 D0GB223JA008 1/16W...
  • Page 141 Safety Ref. Part No. Part Name & Qty Remarks Safety Ref. Part No. Part Name & Qty Remarks Description Description R7009 D0GB272JA008 2.7K 1/16W C2052 F1G1C1030007 0.01uF R7010 D0GB471JA008 1/16W C2053 F1G1E1020001 1000pF R7011 D0GB472JA008 4.7K 1/16W C2054 F2G0J101A083 100uF 6.3V R7012 D0GB272JA008...
  • Page 142 Safety Ref. Part No. Part Name & Qty Remarks Safety Ref. Part No. Part Name & Qty Remarks Description Description C2962 F1H1H103A219 0.01uF C5217 F2A1J3310032 330uF C2963 F1H1H681A013 680pF C5218 F1J2A333A024 0.033uF 100V C2964 F1H1H104A013 0.1uF C5219 F1H1H104A013 0.1uF C2966 F1J1V1050001 C5222 ECQV1H474JL3...
  • Page 143 Safety Ref. Part No. Part Name & Qty Remarks Description C5791 F1J0J106A020 10uF 6.3V C5795 F1H1H102A219 1000pF C5796 F1H1H104A013 0.1uF C5798 F2A1H100A454 10uF C5799 F2B2G6R80001 6.8uF 400V C5800 F1J2E1030004 0.01uF 250V C5805 F2A1J1020045 1000uF C5811 F1J2E1030004 0.01uF 250V C5813 F2A1V331B150 330uF C5817 F1H2A682A002...
  • Page 144 MMH1003...

Comments to this Manuals

Symbols: 0
Latest comments:
  • Alexander balza Nov 21, 2016 11:50:
    Buenas noches mi control no funciona y me sale un código en equipó set 2 como puedo para cambiarle es codigo